| 975 | 17 | 38 |
| 下载次数 | 被引频次 | 阅读次数 |
为发展高性能结构功能一体化的新型陶瓷装甲防护材料,采用流延法结合热压烧结法制备了不同结构设计的层状SiC/BN陶瓷,研究了材料的烧结特性、显微结构、力学性能及抗冲击性能。结果表明:层状结构设计可以实现陶瓷材料的强韧化效果,其失效模式为非脆性断裂,保持结构完整性的能力明显提升;弯曲强度410MPa,断裂韧性7.6MPa·m1/2。打靶结果表明层状结构具有较好的动态吸能效果与保持结构完整性的能力,可以抵抗多发弹丸冲击:凹陷深度为7.5mm,破碎锥直径40 mm,动态损伤以环向为主,综合防护能力得到明显提升。
Abstract：Laminated SiC/BN ceramics with different structures were prepared via tape casting and hot pressing sintering to develop high-performance ceramic armor with structural and functional designs. The sinter ability, microstructure, mechanical properties and impact resistance of the prepared ceramics were investigated. The results show that the laminated structure of the ceramics can achieve the strengthening and toughening effects, and the failure mode is non-brittle fracture, and its ability to maintain the structural integrity is improved. The flexural strength of 410 MPa and the fracture toughness of 7.6 MPa·m1/2 can be obtained. The bullet shooting results show that the laminated ceramic has a good energy absorption effect and an ability to maintain the structural integrity, which can resist the impact of multiple projectiles. The impact depth is 7.5 mm, the diameter of crushing cone is 40 mm, and the dynamic damage is mainly circumferential damage. The comprehensive protection ability is improved.
[1] KARANDIKAR P G, EVANS G, WONG S, et al. A Review of ceramics for armor applications[J]. Ceram Eng Sci Proc, 2009, 29(6):163–175.
[2] LI L J, CHENG L F, FAN S W, et al. Dynamic pseudoplastic behavior of laminated ceramics with soft and hard interbedded dense layers[J].Mater Lett, 2015, 152:268–271.
[3] FLINDERS M, RAY D, ANDERSON A, et al. High-toughness silicon carbide as armor[J]. J Am Ceram Soc, 2005, 88(8):2217–2226.
[4]陈娟,彭蜀晋.现代防弹材料发展概观[J].化学教育, 2018, 39(8):7–12.CHEN J, PENG J S. Chin J Chem Educt(in Chinese), 2018, 39(8):7–12.
[5]田华,张存新.我国兵器新材料技术的发展方向与重点[J].兵器装备工程学报, 2010, 31(7):147-150.TIAN Hua, ZHANG Cunxin. J Ordn Equip Eng(in Chinese), 2010,31(7):147–150.
[6] SARVESTANI H Y, MIRKHALAF M, AKBARZADEH A H, et al.Multilayered architectured ceramic panels with weak interfaces:energy absorption and multi-hit capabilities[J]. Mater Design, 2019, 167:107627.
[7] TASDEMIRCI A, HALL I. The effects of plastic deformation on stress wave propagation in multi-layer materials[J]. Int J Impact Eng, 2007,34(11):1797–1813.
[8] XIE Y P, CHENG L F, LI L J, et al. Fabrication of laminated SiCW/SiC ceramic composites by CVI[J]. J Eur Ceram Soc, 2013, 33(10):1701–1706.
[9] CLEGG W J, KENDALL K, ALFORD N M, et al. A simple way to make tough ceramics[J]. Nature, 1990, 347(6292):455–457.
[10] WINDSHEIMER H, TRAVITZKY N, HOFENAUER A, et al.Laminated Object manufacturing of preceramic-paper-derived Si-SiC composites[J]. Adv Mater, 2007, 19(24):4515–4519.
[11] CHEGN L F, SUN M Y, YE F, et al. Structure design, fabrication,properties of laminated ceramics:A Review[J]. Int J Light Mater Manuf, 2018, 1(3):126–141.
[12] KOVAR D, THOULESS M D, HALLPRAN J W. Crack deflection and propagation in layered silicon nitride/boron nitride ceramics[J]. J Am Ceram Soc, 2010, 81(4):1004–1112.
[13] SUN M Y, BAI Y H, LI M X, et al. Structural design and energy absorption mechanism of laminated SiC/BN ceramics[J]. J Eur Ceram Soc, 2018, 38(11):3742–3751.
[14] KIEFER T, MOON H, LANGE F F. Compressive surface layer to avoid edge cracking in laminar ceramic composite[J]. J Am Ceram Soc,2005, 88(10):2855–2858.
[15]李翠伟,汪长安,黄勇,等. Si3N4/BN层状复合陶瓷抗穿甲破坏实验研究[J].无机材料学报, 2005, 20(1):99–104.LI Cuiwei, WANG Changan, HUANG Yong, et al. J Inorg Mater(in Chinese), 2005, 20(1):99–104.
[16] SWLLAPPAN P, WANG E, SANTOS, et al. Wave propagation through alumina-porous alumina laminates[J]. J Eur Ceram Soc, 2015, 35(1):197–210.
[17] SHE J H, UENO K. Effect of additive content on liquid-phase sintering on silicon carbide ceramics[J]. Mater Res Bull, 1999, 34:1629–1636.
[18] CAN A, HERRMANN M, MCLACHLAN D S, et al. Densification of liquid phase sintered silicon carbide[J]. J Eur Ceram Soc, 2006, 26:1707–1713.
基本信息:
DOI：10.14062/j.issn.0454-5648.20200404
中图分类号:TQ174.1
引用信息:
[1]成来飞,孙孟勇,范尚武,等.层状SiC/BN陶瓷的制备及抗冲击性能[J].硅酸盐学报,2021,49(02):239-245.DOI:10.14062/j.issn.0454-5648.20200404.
基金信息:
国家自然基金重点项目(51632007)资助
2020-06-09
2020
2020-12-04
2020-09-14
2020
1
2020-10-22
2020-10-22
2020-10-22