| 349 | 4 | 133 |
| 下载次数 | 被引频次 | 阅读次数 |
无铅(Bi0.5Na0.5)TiO3 (BNT)基弛豫铁电薄膜以其高Curie温度和大极化在介质储能中受到广泛关注，然而较低的击穿电场限制了它们的应用。选择Sr0.7Bi0.2TiO3(SBT)作为固溶组元，通过组分调控提高薄膜击穿强度，优化储能性能。结果表明：BNT–xSBT薄膜均为单一钙钛矿结构，没有明显的第二相。随SBT含量增加，晶胞参数先增大后降低，介电常数略微下降，介电损耗保持稳定，击穿强度先上升后降低。最终，在最优组分样品BNT–0.40SBT中获得了3 622.25 kV/cm的高击穿强度和85.99 J/cm3的高储能密度。这种优异的能量存储密度和出色的稳定性，表明样品BNT–0.40SBT是脉冲功率和电力电子应用电容器的有前途的候选者。
Abstract：Introduction The environmentally friendly dielectric capacitors based on lead-free relaxation ferroelectrics have attracted recent attention.The material (Bi0.5Na0.5)TiO3 (BNT) exhibits an intrinsic high saturation polarization due to the hybridization between Bi6s and O 2p orbitals,surpassing conventional lead-free relaxor ferroelectrics.However,a low breakdown strength (BDS) of BNT results in a relatively poor energy storage performance,restricting its further applications.Therefore,improving the BDS of BNT-based materials is a necessity towards achieving a high energy storage density,and one effective measure is a compositional modification.Sr0.7Bi0.2TiO3 (SBT) as an emerging relaxor ferroelectric material has a higher dielectric constant due to the ion substitution-induced local charge imbalance and dipole fluctuations in nanoscale.It is anticipated that introducing SBT as a solid solution component into BNT matrix films can enhance the BDS of the films,optimizing their energy storage performance.In this paper,the impact of SBT/BNT solid solution ratio on phase structure,microstructure,dielectric,and energy storage properties of the SBT modified BNT-based film was investigated.Methods The precursor solutions for (1–x)(Bi0.5Na0.5)TiO3–x Sr0.7Bi0.2TiO3 (BNT–x SBT,x=0.30,0.35,0.40,0.45,and 0.50) were prepared by a sol–gel method.The precursor solutions prepared were aged via static aging for 24 h before spin-coating.Subsequently,the films were heat-treated on a hot plate and rapidly annealed at 630℃for 2 min.The film preparation process,including spin-coating,heat treatment,and rapid annealing,was repeated for 8 times to complete the film fabrication.The crystal structure of the films was analyzed by a model PANalytical X'Pert PRO X-ray diffractometer (XRD).The surface and cross-sectional morphologies of the samples were determined a model Ultra Plus scanning electron microscope (SEM).To evaluate the electrical properties of the samples,platinum electrodes with a diameter of 0.2 mm were deposited on the film surface using magnetron sputtering.The leakage current density of the films was obtained by a model 6517A electrostatic/high-resistance meter.The ferroelectric properties of the samples were tested by a model PolyK CPE1801 ferroelectric workstation.The dielectric properties of the samples were analyzed by a model 4294A precision impedance analyzer.Results and discussion All the BNT–x SBT films exhibit a single pseudocubic phase structure.The unit cell volume initially increases and then decreases as the SBT content increases,which is affected by a combined effect of Sr2+doping at the A-site and vacancies.The films demonstrate a well-crystallinity,clear grain boundaries,good adhesion to the substrate,and a thickness of approximately 140 nm.The introduction of SBT results in a reduction in the dielectric constant of the film,improving the temperature stability of the dielectrics.At 2 000 kV/cm,the maximum polarization (Pmax) and remnant polarization (Pr) of the films both decrease as the SBT content increases,which is consistent with the dielectric performance.The incorporation of an appropriate amount of SBT increases the BDS of the films from 2 975 k V/cm for BNT–0.3SBT to 3 622 kV/cm for BNT–0.40SBT,which is consistent with the leakage current density.Therefore,the optimal composition BNT–0.40SBT film achieves a high recoverable energy storage density (Wrec) of 85.99 J/cm3 and an efficiency of 74%at the breakdown electric field (Eb).This film demonstrates some advantages,compared to other film capacitors.In addition,the BNT–0.40SBT film exhibits a superior high-frequency stability,a heat resistance,and a fatigue resistance,showing a promising potential for applications in dielectric capacitors.Conclusions All the films exhibited a well-crystallinity,having a single perovskite phase.With the introduction of SBT,the unit cell volume initially increased and the decreased,and the BDS firstly increased and then decreased.The dielectric constant and polarization intensity gradually decreased,while dielectric loss remained stable.The optimal component BNT–0.40SBT film achieved a high BDS of 3 622.25 kV/cm and a high energy storage density (Wrec) of 85.99 J/cm3.The superior energy storage density and stability indicated that BNT–0.40SBT thin films could be promising candidates for pulse power and power electronics applications in capacitors.
[1] WANG G, LU Z L, LI Y, et al. Electroceramics for high-energy density capacitors:Current status and future perspectives[J]. Chem Rev, 2021,121(10):6124–6172.
[2] ZHOU X F, XUE G L, LUO H, et al. Phase structure and properties of sodium bismuth titanate lead-free piezoelectric ceramics[J]. Prog Mater Sci, 2021, 122:100836.
[3]刘润林,李长姣,王建,等.无监督学习探索高介电常数的ABO3型钙钛矿材料[J].硅酸盐学报, 2023, 51(2):367–372.LIU Runlin, LI Changjiao, WANG Jian, et al. J Chin Ceram Soc, 2023,51(2):367–372.
[4] SHEN Z H, LIU H X, SHEN Y, et al. Machine learning in energy storage materials[J]. Interdiscip Mater, 2022, 1(2):175–195.
[5] LI D, ZENG X, LI Z, et al. Progress and perspectives in dielectric energy storage ceramics[J]. J Adv Ceram, 2021, 10(4):675–703.
[6]李晓伟.钛酸铋钠基弛豫铁电陶瓷的结构、介电及储能性能研究[D].北京:北京科技大学, 2022.LI Xiaowei. Structure, dielectric and energy storage properties of sodium bismuth titanate-based relaxor ferroelectric ceramics[D].Beijing:University of Science and Technology Beijing, 2022.
[7] LI D X, MENG X Y, ZHOU E H, et al. Ultrahigh energy density of antiferroelectric PbZrO3-based films at low electric field[J]. Adv Funct Materials, 2023, 33(44):2302995.
[8] JAYAKRISHNAN A R, SILVA J P B, KAMAKSHI K, et al. Are lead-free relaxor ferroelectric materials the most promising candidates for energy storage capacitors?[J]. Prog Mater Sci, 2023, 132:101046.
[9]杜金花,李雍,孙宁宁,等.无机电介质材料储能行为研究现状[J].硅酸盐学报, 2022, 50(3):608–624.DU Jinhua, LI Yong, SUN Ningning, et al. J Chin Ceram Soc, 2022,50(3):608–624.
[10] YANG L T, KONG X, LI F, et al. Perovskite lead-free dielectrics for energy storage applications[J]. Prog Mater Sci, 2019, 102:72–108.
[11] WANG Z P, KANG R R, LIU W Y, et al.(Bi0.5Na0.5)TiO3-based relaxor ferroelectrics with medium permittivity featuring enhanced energy-storage density and excellent thermal stability[J]. Chem Eng J,2022, 427:131989.
[12] YAN C, LIU X F, YUE C Y, et al. Outstanding enhanced breakdown field strength and energy storage properties in Na0.5Bi0.5TiO3-based thin film by the aging process[J]. J Power Sources, 2021, 508:230331.
[13] ZHANG Y L, LI W L, QIAO Y L, et al. 0.6ST–0.4NBT thin film with low level Mn doping as a lead-free ferroelectric capacitor with high energy storage performance[J]. Appl Phys Lett, 2018, 112(9):093902.
[14] YANG C H, QIAN J, HAN Y J, et al. Design of an all-inorganic flexible Na0.5Bi0.5TiO3-based film capacitor with giant and stable energy storage performance[J]. J Mater Chem A, 2019, 7(39):22366–22376.
[15] ZHU X P, SHI P, KANG R R, et al. Enhanced energy storage density of Sr0.7BixTiO3 lead-free relaxor ceramics via A-site defect and grain size tuning[J]. Chem Eng J, 2021, 420:129808.
[16] WANG H, HAO H, LI D X, et al. Synergistic effect enhances energy storage properties of BNT-based relaxor ferroelectric thin films[J].Ceram Int, 2023, 49(8):12443–12451.
[17] QIAO X S, WU D, ZHANG F D, et al. Enhanced energy density and thermal stability in relaxor ferroelectric Bi0.5Na0.5TiO3-Sr0.7Bi0.2TiO3ceramics[J]. J Eur Ceram Soc, 2019, 39(15):4778–4784.
[18] WANG J, QIU G X, QIAN H, et al. Optimized energy-storage performance in Mn-doped Na0.5Bi0.5TiO3–Sr0.7Bi0.2Ti O3 lead-free dielectric thin films[J]. Appl Surf Sci, 2022, 571:151274.
[19] XU L X, WU S H, ZHU K, et al. Enhanced piezoelectricity and reduced leakage current of a novel(1-x)Bi0.5Na0.5Ti O3–x(Sr0.7Bi0.2□0.1)TiO3thin film[J]. Inorg Chem Front, 2021, 8(3):700–710.
[20] WANG Q, XIE B, ZHENG Q Y, et al. Bi0.5Na0.5TiO3-based relaxor-ferroelectric ceramics for low-electric-field dielectric energy storage via bidirectional optimization strategy[J]. Chem Eng J, 2023,452:139422.
[21] KANG R R, WANG Z P, YANG W J, et al. Enhanced energy storage performance in Sr0.7La0.2Zr0.15Ti0.85O3-modified Bi0.5Na0.5TiO3ceramics via constructing local phase coexistence[J]. Chem Eng J,2022, 446:137105.
[22] JIANG Y L, NIU X, LIANG W, et al. Enhanced energy storage performance in Na0.5Bi0.5TiO3-based relaxor ferroelectric ceramics via compositional tailoring[J]. Materials, 2022, 15(17):5881.
[23] SUN Y L, ZHANG L, HUANG Q W, et al. Ultrahigh energy storage density in glassy ferroelectric thin films under low electric field[J].Adv Sci, 2022, 9(31):e2203926.
[24] WANG Z P, KANG R R, HONG Z K, et al. Achieving ultrahigh energy-storage density with excellent thermal stability in Sr0.7Bi0.2TiO3-based relaxors via polarization behavior modulation[J].ACS Appl Mater Interfaces, 2022, 14(39):44389–44397.
[25] ABBAS W, HO D, PRAMANICK A. High energy efficiency and thermal stability of Ba TiO3–BiScO3 thin films based on defects engineering[J]. ACS Appl Electron Mater, 2021, 3(3):1097–1106.
[26] CHE Z Y, MA L, LUO G G, et al. Phase structure and defect engineering in(Bi0.5Na0.5)TiO3-based relaxor antiferroelectrics toward excellent energy storage performance[J]. Nano Energy, 2022, 100:107484.
[27] WANG Y S, CHEN Y H, ZHAO D E, et al. Simultaneously enhanced energy density and discharge efficiency of(Na0.5Bi0.5)0.7Sr0.3Ti O3–La1/3(Ta0.5Nb0.5)O3 lead-free energy storage ceramics via grain inhibition and dielectric peak flattening engineering[J]. Dalton Trans, 2022, 51(36):13867–13877.
[28]邓伟,李昊,李志鹏,等. A位稀土离子La3+掺杂BNBST弛豫铁电陶瓷的储能特性增强研究[J].中国陶瓷, 2023, 59(9):20–27.DENG Wei, LI Hao, LI Zhipeng, et al. China Ceram, 2023, 59(9):20–27.
[29] CHEN L M, ZHOU J, XU L Z, et al. Achieving ultra-short discharge time and high energy density in lead-based antiferroelectric ceramics by A-site substitution[J]. Chem Eng J, 2022, 447:137367.
[30] LI C J, YAO M W, YAO X. An effective strategy for enhancing energy storage density in(Pb1-1.5xGdx)(Zr0.87Sn0.12Ti0.01)O3 antiferroelectric ceramics[J]. J Mater Chem A, 2023, 11(35):18689–18701.
[31] XIE Y J, HAO H, XIE J, et al. Ultra-high energy storage density and enhanced dielectric properties in BNT–BT based thin film[J]. Ceram Int, 2021, 47(16):23259–23266.
[32] SUI H T, SUN H J, XIAO S B, et al. Boosting energy storage performance of relaxor Na0.5Bi0.5(Fe0.03Ti0.97)O3/Na0.5Bi0.5(Zr0.02Ti0.98)O3-based multilayer thin films under moderate electric field via aging&treating processing[J]. J Power Sources, 2021, 506:230190.
[33] XU H H, HAO H, XIE Y J, et al. Microcrystalline structure modulation and energy storage properties of BaZr0.25Ti0.75O3 thin films[J]. J Alloys Compd, 2022, 907:164236.
[34] LI Z, ZHAO Y, LI W L, et al. Enhanced energy storage properties of amorphous BiFeO3/Al2O3 multilayers[J]. J Mater Res Technol, 2021,11:1852–1858.
[35] SONG B J, WU S H, YAN H, et al. Fatigue-less relaxor ferroelectric thin films with high energy storage density via defect engineer[J]. J Mater Sci Technol, 2021, 77:178–186.
[36] ACHARYA M, BANYAS E, RAMESH M, et al. Exploring the Pb1–xSrxHfO3 system and potential for high capacitive energy storage density and efficiency[J]. Adv Mater, 2022, 34(1):2105967.
[37] CHEN Q Q, ZHANG Y Y, ZHANG J, et al. Effects of Ti-doping on energy storage properties and cycling stability of Pb0.925La0.05ZrO3antiferroelectric thin films[J]. Mater Sci Eng B, 2022, 286:116024.
[38] WU M Y, YU S H, WANG X H, et al. Ultra-high energy storage density and ultra-wide operating temperature range in Bi2Zn2/3Nb4/3O7thin film as a novel lead-free capacitor[J]. J Power Sources, 2021, 497:229879.
[39] YAN J, WANG Y L, WANG C M, et al. Boosting energy storage performance of low-temperature sputtered Ca Bi2Nb2O9 thin film capacitors via rapid thermal annealing[J]. J Adv Ceram, 2021, 10(3):627–635.
[40] YANG C H, LV P P, QIAN J, et al. Fatigue-free and bending-endurable flexible Mn-doped Na0.5Bi0.5Ti O3–BaTiO3–BiFeO3film capacitor with an ultrahigh energy storage performance[J]. Adv Energy Mater, 2019, 9(18):1803949.
基本信息:
DOI：10.14062/j.issn.0454-5648.20230833
中图分类号:TM53;TB383.2
引用信息:
[1]王鑫,郝华,李东旭,等.Sr_(0.7)Bi_(0.2)TiO_3改性Bi_(0.5)Na_(0.5)TiO_3基薄膜电储能特性的优化[J].硅酸盐学报,2024,52(04):1374-1383.DOI:10.14062/j.issn.0454-5648.20230833.
基金信息:
武汉理工大学三亚科教创新园开放基金(2022KF0008);; 国家重点研发计划项目(2023YFB3812200);; 广东省基础与应用基础研究基金项目(2022b1515120041)
2024-03-21
2024-03-21
2024-03-21