| 910 | 0 | 86 |
| 下载次数 | 被引频次 | 阅读次数 |
电解质与阴极界面是影响固体氧化物燃料电池(SOFC)性能的主要因素之一，提升界面化学兼容性、强化荷电传导、减少界面间元素互扩散，对提升SOFC单电池性能及长期运行稳定性至关重要。本文简述了近年来改善电解质与阴极界面问题的方法途径，包括阴极组成与结构优化、多层复合电解质设计与构建、界面强化方法等，为助力SOFC研发和应用提供参考。
Abstract：The interface between electrolyte and cathode is a primary factor affecting the performance of solid oxide fuel cells(SOFCs). Enhancing the chemical compatibility of the interface, fortifying the charge conduction, and mitigating the interdiffusion of elements between the interfaces are imperative to optimize the performance of SOFC single-cells and ensure a long-term operational stability. This review represents the methodologies used to enhance the interface between electrolyte and cathode in recent years. These methodologies encompass the optimization of cathode composition and structure, the design and construction of multilayer composite electrolyte, and interfacial reinforcement methods. These approaches serve as a valuable reference for SOFC development and application. At the cathode layer, a dense electrolyte and a porous electrolyte backbone are constructed. A solution infiltration technique is utilized to prepare highly active nano-cathodes within the porous electrolyte backbone, thereby eliminating the macroscopic interface between the electrolyte and the cathode. Advanced coating techniques and infiltration technique are employed to modify the cathode surface, thereby enhancing cathode electrochemical performance and single-cell operational durability. The development of novel cathode materials, regulation of component ratios within composite cathodes, and the addition of negative thermal expansion materials prove effective in enhancing the thermal expansion compatibility of the cathode. The thermal-expansion offset enhances long-term electrode durability and ORR activity. At the electrolyte layer, constructing multi-layer electrolyte films and optimizing the structure of single cell enhance performance and reduce degradation. Multi-layer composite structures improve an electrolyte reliability and a cathode interface chemical compatibility. However, the preparation becomes a challenge and primarily relies on advanced coating technologies. Low-cost, high-density coating technologies are urgently needed, and a hydrothermal in-situ growth technique emerges, thus reducing production costs, while enhancing single-cell performance and long-term durability. At the electrolyte-cathode interface, the contact between the electrolyte and the cathode directly affects the interface resistance, oxygen ion conduction, and interface bonding strength. Therefore, interface reinforcement can effectively improve the energy efficiency and stability of single cells. The dense nanostructure functional layer(NFL) overcomes the physical limitations of the porous cathode-dense electrolyte interface, thus enhancing single-cell performance, interfacial bonding, and long-term durability. This review summarizes some research work related to the interface between the electrolyte and cathode in SOFCs, thus providing a reference for the development of high-performance and long-term durability. This review also provides a reference for SOEC research and development since the materials and structure of solid oxide electrolysis cells(SOECs) are similar to those of SOFCs. Summary and Prospects The interfacial contact and charge conduction between the electrolyte and cathode have a direct impact on the performance and efficiency of single cells, which is a crucial area in both fundamental research and technological development of SOFCs. The following perspectives for future development are provided. The development of novel electrolytes and electrode materials represents an effective strategy to address interfacial issues. Concurrently, the exploration of innovative interfacial structural designs can enhance the performance and stability within existing material systems. Future research endeavors should prioritize meeting the practical demands of industrial applications. Furthermore, it is essential to optimize the preparation process. The quality of the interface between the electrolyte and the cathode directly affects the overall performance of SOFCs. Therefore, optimizing the preparation process is of crucial importance. Currently, coating technologies such as pulsed laser deposition(PLD) and chemical vapor deposition(CVD) can achieve a precise preparation of specific compositions and structures. In the future, it is necessary to focus on the research and development of new high-performance, low-cost thin film preparation technologies with large-scale manufacturing capabilities to further improve interface quality. In addition, there is a focus on interdisciplinary research. Various in-situ spectroscopic characterization methods, machine learning and artificial intelligence technologies will also contribute to SOFCs research, including material performance prediction, parameter optimization design, and operating condition performance simulation. This can promote the connection between theoretical models and practical applications, driving SOFCs technology toward higher efficiency and lower costs. Finally, despite significant progress in lab-scale research, the commercialization of SOFCs still faces some challenges. In the next phase, it is necessary to further optimize the cell preparation process and operating conditions, such as electrolyte structure, composite electrode materials, and sintering processes. Reducing costs, improving cell reliability and lifespan can promote SOFCs widespread application in the energy sector.
[1] HAN M, ZHANG Y. Ceramic materials for solid oxide fuel cell[J]. J Chin Ceram Soc, 2017, 45(11):1548–1554.
[2] UDOMSILP D, RECHBERGER J, NEUBAUER R, et al.Metal-supported solid oxide fuel cells with exceptionally high power density for range extender systems[J]. Cell Rep Phys Sci, 2020, 1(6):100072.
[3] JIANG S P. Solid-state electrochemistry and solid oxide fuel cells:Status and future prospects[J]. Electrochem Energy Rev, 2022, 5(1):21.
[4] ZHANG J, RICOTE S, HENDRIKSEN P V, et al. Advanced materials for thin-film solid oxide fuel cells:Recent progress and challenges in boosting the device performance at low temperatures[J]. Adv Funct Mater, 2022, 32(22):2111205.
[5]杨志宾,郑紫微,朱腾龙,等.阳极支撑三层一体化结构电池的制备及性能[J].硅酸盐学报, 2013, 41(2):129–133.YANG Zhibin, ZHENG Ziwei, ZHU Tenglong, et al. J Chin Ceram Soc, 2013, 41(2):129–133.
[6] JIA C, CHEN M, HAN M F. Performance and electrochemical analysis of solid oxide fuel cells based on LSCF–YSZ nano-electrode[J]. Int J Appl Ceram Technol, 2017, 14(5):1006–1012.
[7] TONG X F, OVTAR S, BRODERSEN K, et al. Large-area solid oxide cells with La0.6Sr0.4CoO3–δ infiltrated oxygen electrodes for electricity generation and hydrogen production[J]. J Power Sources, 2020, 451:227742.
[8] LYNCH M E, YANG L, QIN W T, et al. Enhancement of La0.6Sr0.4Co0.2Fe0.8O3–δ durability and surface electrocatalytic activity by La0.85Sr0.15Mn O3±δ investigated using a new test electrode platform[J]. Energy Environ Sci, 2011, 4(6):2249–2258.
[9] GONG Y H, PALACIO D, SONG X Y, et al. Stabilizing nanostructured solid oxide fuel cell cathode with atomic layer deposition[J]. Nano Lett, 2013, 13(9):4340–4345.
[10] LI D, ZHANG X B, LIANG C Y, et al. Study on durability of novel core-shell-structured La0.8Sr0.2Co0.2Fe0.8O3–δ@Gd0.2Ce0.8O1.9 composite materials for solid oxide fuel cell cathodes[J]. Int J Hydrog Energy,2021, 46(55):28221–28231.
[11] CHEN Y, YOO S, LI X X, et al. An effective strategy to enhancing tolerance to contaminants poisoning of solid oxide fuel cell cathodes[J].Nano Energy, 2018, 47:474–480.
[12] ZHANG Y, CHEN B, GUAN D Q, et al. Thermal-expansion offset for high-performance fuel cell cathodes[J]. Nature, 2021, 591(7849):246–251.
[13] LU F, SHI Y J, SHI L, et al. Improved SOFC performance by enhancing cathode/electrolyte bonding and grain refinement of cathode with thermal expansion offset[J]. Ceram Int, 2024, 50(22):46318–46326.
[14] HU L, ZHOU D F, ZHU X F, et al. A high-performance composite cathode based on thermal expansion complementation for SOFC[J].Fuel, 2024, 362:130864.
[15] CHOU J T, INOUE Y, KAWABATA T, et al. Mechanism of SrZrO3Formation at GDC/YSZ interface of SOFC cathode[J]. J Electrochem Soc, 2018, 165(11):F959–F965.
[16] YANG K, SHEN J H, YANG K Y, et al. Formation of La2Zr2O7 or SrZrO3 on cathode-supported solid oxide fuel cells[J]. J Power Sources,2006, 159(1):63–67.
[17] RIED P, LORENZ C, BR?NSTRUP A, et al. Processing of YSZ screen printing pastes and the characterization of the electrolyte layers for anode supported SOFC[J]. J Eur Ceram Soc, 2008, 28(9):1801–1808.
[18] HUI R, WANG Z W, KESLER O, et al. Thermal plasma spraying for SOFCs:Applications, potential advantages, and challenges[J]. J Power Sources, 2007, 170(2):308–323.
[19] WILDE V, ST?RMER H, SZáSZ J, et al. Gd0.2Ce0.8O2 diffusion barrier layer between(La0.58Sr0.4)(Co0.2Fe0.8)O3–δ cathode and Y0.16Zr0.84O2 electrolyte for solid oxide fuel cells:Effect of barrier layer sintering temperature on microstructure[J]. ACS Appl Energy Mater, 2018, 1(12):6790–6800.
[20] SZáSZ J, WANKMüLLER F, WILDE V, et al. Nature and functionality of La0.58Sr0.4Co0.2Fe0.8O3-δ/Gd0.2Ce0.8O2–δ/Y0.16Zr0.84O2-δInterfaces in SOFCs[J]. J Electrochem Soc, 2018, 165(10):F898–F906.
[21] WACHSMAN E D, LEE K T. Lowering the temperature of solid oxide fuel cells[J]. Science, 2011, 334(6058):935–939.
[22] ZHANG J, LENSER C, RUSSNER N, et al. Boosting intermediate temperature performance of solid oxide fuel cells via a tri-layer ceria–zirconia–ceria electrolyte[J]. J Am Ceram Soc, 2023, 106(1):93–99.
[23] RIEGRAF M, HAN F, SATA N, et al. Intercalation of thin-film Gd-doped ceria barrier layers in electrolyte-supported solid oxide cells:Physicochemical aspects[J]. ACS Appl Mater Interfaces, 2021, 13(31):37239–37251.
[24] FONSECA F C, UHLENBRUCK S, NEDéLéC R, et al. Properties of bias-assisted sputtered gadolinia-doped ceria interlayers for solid oxide fuel cells[J]. J Power Sources, 2010, 195(6):1599–1604.
[25] WANG Y G, JIA C, LYU Z W, et al. Performance and stability analysis of SOFC containing thin and dense gadolinium-doped ceria interlayer sintered at low temperature[J]. J Materiomics, 2022, 8(2):347–357.
[26] NI D W, ESPOSITO V. Densification of Ce0.9Gd0.1O1.95 barrier layer by in situ solid state reaction[J]. J Power Sources, 2014, 266:393–400.
[27] CHOI H J, NA Y H, SEO D W, et al. Densification of gadolinia-doped ceria diffusion barriers for SOECs and IT-SOFCs by a Sol–gel process[J]. Ceram Int, 2016, 42(1):545–550.
[28] WANG G Y, ZHANG Y L, HAN M F. Densification of Ce0.9Gd0.1O2–δinterlayer to improve the stability of La0.6Sr0.4Co0.2Fe0.8O3–δ/Ce0.9Gd0.1O2–δ interface and SOFC[J]. J Electroanal Chem, 2020, 857:113591.
[29] LYU Q Q, ZHU T L, QU H X, et al. Lower down both ohmic and cathode polarization resistances of solid oxide fuel cell via hydrothermal modified gadolinia doped ceria barrier layer[J]. J Eur Ceram Soc, 2021, 41(12):5931–5938.
[30] H. Zhao, Q. Lyu, L. Cheng, et al. In-situ hydrothermal growth of dense ceria based barrier layer for solid oxide fuel cells[J]. J Chin Ceram Soc,2023, 51:1000.
[31] Z. Li, Q. Lyu, H. Zhao, et al. Research of GDC barrier layer applications by hydrothermal in situ growth in industrial-sized SOFC[J]. Energy Storage Sci Technol, 2024, 13:2407.
[32] LYU Q Q, ZHAO H Y, HE J Y, et al. An in situ hydrothermally self-crystallized dense ceria-based barrier layer for solid oxide fuel cells[J]. J Mater Chem A, 2024, 12(16):9778–9786.
[33] ZHAO H Y, LYU Q Q, SUN H, et al. Construction and scale-up of high performing SOFC with enhanced Gdx Ce1-x O2-δ barrier layer self-crystallization and defect-free GDC–YSZ interface[J]. Fuel, 2024,374:132511.
[34] LYU Q Q, ZHU T L, XU N, et al. High-performance(Ce, Zr)O2-free solid oxide fuel cell with an active-sintered cathode interface and a low-temperature densified micron-scale barrier layer[J]. ACS Appl Mater Interfaces, 2023, 15(34):40588–40594.
[35] BIAN W J, WU W, WANG B M, et al. Revitalizing interface in protonic ceramic cells by acid etch[J]. Nature, 2022, 604(7906):479–485.
[36] CHANG H, XU H W, MA X, et al. Effectively regulate NaOH deliquescence rate to prepare yttria-stabilized zirconia self-supported electrolytes for solid oxide cell applications[J]. Mater Sci Eng B, 2025,312:117858.
[37] HE J Y, LYU Q Q, ZHU T L, et al.(digital presentation)GDC/YSZ bilayer electrolyte fabrication by in situ hydrothermal growth[J]. ECS Trans, 2023, 111(6):2495–2502.
[38] JANUSCHEWSKY J, AHRENS M, OPITZ A, et al. Optimized La0.6Sr0.4CoO3–δ thin-film electrodes with extremely fast oxygen-reduction kinetics[J]. Adv Funct Mater, 2009, 19(19):3151–3156.
[39] CHOI S, KUCHARCZYK C J, LIANG Y G, et al. Exceptional power density and stability at intermediate temperatures in protonic ceramic fuel cells[J]. Nat Energy, 2018, 3:202–210.
[40] DEVELOS-BAGARINAO K, ISHIYAMA T, KISHIMOTO H, et al.Nanoengineering of cathode layers for solid oxide fuel cells to achieve superior power densities[J]. Nat Commun, 2021, 12(1):3979.
[41] MACHADO M, BAIUTTI F, BERNADET L, et al. Functional thin films as cathode/electrolyte interlayers:A strategy to enhance the performance and durability of solid oxide fuel cells[J]. J Mater Chem A, 2022, 10(33):17317–17325.
[42] CHEN Y, LE Z, AI N, et al. A Brief review on direct assembly method to construct electrodes of solid oxide cells[J]. J Ceram, 2022, 43:825.
[43] LIM Y, PARK J, LEE H, et al. Rapid fabrication of lanthanum strontium cobalt ferrite(LSCF)with suppression of LSCF/YSZ chemical side reaction via flash light sintering for SOFCs[J]. Nano Energy, 2021, 90:106524.
基本信息:
DOI：10.14062/j.issn.0454-5648.20250012
中图分类号:TM911.4
引用信息:
[1]赵浩宇,吕秋秋,朱腾龙.固体氧化物燃料电池电解质与阴极界面研究进展及展望[J].硅酸盐学报,2025,53(12):3790-3797.DOI:10.14062/j.issn.0454-5648.20250012.
基金信息:
国家自然科学基金（22479076）; 江苏省重点研发计划（BE2022029）