| 1,000 | 24 | 107 |
| 下载次数 | 被引频次 | 阅读次数 |
本工作着眼于绿色高附加值的发泡陶瓷产业，以消耗利用固废为前提，综述了利用原位发泡工艺制备发泡陶瓷的研究进展，并从固废原材料、发泡剂、添加剂、制备工艺及发泡陶瓷的性能与应用等方面展开了讨论。结合前期研究基础，揭示了发泡行为与烧结过程的相互作用，提出了发泡陶瓷的原位成孔烧结机制，并对目前存在的问题及未来发展方向进行了总结，以期为纵深推动固废综合利用及发泡陶瓷的发展与应用提供参考。
Abstract：The comprehensive utilization of bulk solid waste is of great significance to the realization of carbon neutrality and standards. This review represented recent work on the utilization of solid wastes for preparing foamed ceramics by in-situ foaming process. Especifically, solid waste raw materials, foaming agents and additives, preparation process as well as the performance and application of foamed ceramics were discussed. In addition, the interaction between foaming behavior and sintering process was also revealed, the in-situ pore forming sintering mechanism of foamed ceramics was described, and the existing problems and future development direction were summarized to provide a reference for promoting the further comprehensive utilization of solid waste for preparing foamed ceramics.
[1] MOHAJERANI A, VAJNA J, CHEUNG T H H, et al. Practical recycling applications of crushed waste glass in construction materials:A review[J]. Constr Building Mater, 2017, 156:443–467.
[2] RAWLINGS R D, WU J P, BOCCACCINI A R. Glass-ceramics:Their production from wastes:A review[J]. J Mater Sci, 2006, 41(3):733–761.
[3] BERNARDO E, CEDRO R, FLOREAN M, et al. Reutilization and stabilization of wastes by the production of glass foams[J]. Ceram Inter, 2007, 33(6):963–968.
[4] LIU T, TANG Y, HAN L, et al. Recycling of harmful waste lead-zinc mine tailings and fly ash for preparation of inorganic porous ceramics[J]. Ceram Inter, 2017, 43(6):4910–4918.
[5] BERNARDO E, SCARINCI G, MADDALENA A, et al. Development and mechanical properties of metal-particulate glass matrix composites from recycled glasses[J]. Composites Part A:Appl Sci Manuf, 2004, 35(1):17–22.
[6] TANG B, LIN J, QIAN S, et al. Preparation of glass–ceramic foams from the municipal solid waste slag produced by plasma gasification process[J]. Mater Lett, 2014, 128:68–70.
[7] YANG Y, WEI Z, CHEN Y L, et al. Utilizing phosphate mine tailings to produce ceramisite[J]. Constr Building Mater, 2017, 155:1081–1090.
[8] APKAR’YAN A S, GUBAIDULINA T A, KAMINSKAYA O V.Foam-glass ceramic based filtering material for removing iron and manganese from drinking water[J]. Glass Ceram, 2015, 71(11/12):413–417.
[9] PENG H X, FAN Z, EVANS J R G, et al. Microstructure of ceramic foams[J]. J Eur Ceram Soc, 2000, 20:807–813.
[10] LAKSHMI V, RESMI V G, RAJU A, et al. Concentration dependent pore morphological tuning of kaolin clay foams using sodium dodecyl sulfate as foaming agent[J]. Ceram Inter, 2015, 41(10):14263–14269.
[11] SILVA R V, DE BRITO J, LYE C Q, et al. The role of glass waste in the production of ceramic-based products and other applications:A review[J]. J Cleaner Prod, 2017, 167:346–364.
[12] ZHU M, JI R, LI Z, et al. Preparation of glass ceramic foams for thermal insulation applications from coal fly ash and waste glass[J].Constr Building Mater, 2016, 112:398–405.
[13] FANG X, LI Q, YANG T, et al. Preparation and characterization of glass foams for artificial floating island from waste glass and Li2CO3[J]. Constr Building Mater, 2017, 134:358–363.
[14] LIMBACHIYA M, MEDDAH M S, FOTIADOU S. Performance of granulated foam glass concrete[J]. Constr Building Mater, 2012, 28(1):759–768.
[15] ONITSUKA K. Construction utilization of foamed waste glass[J]. J Environ Sci, 2004, 16(2):302–307.
[16] YAO Z, LING T C, SARKER P K, et al. Recycling difficult-to-treat e-waste cathode-ray-tube glass as construction and building materials:A critical review[J]. Renewable Sustainable Energy Rev, 2018, 81:595–604.
[17] INIAGHE P O, ADIE G U. Management practices for end-of-life cathode ray tube glass:Review of advances in recycling and best available technologies[J]. Waste Manag Res, 2015, 33(11):947–961.
[18] CIFTCI M, CICEK B. E-waste:A review of CRT(cathode ray tube)recycling[J]. Res Rev:J Mater Sci, 2017, 5(2):170.
[19] LLAUDIS A S, TARI M J O, TEN F J G, et al. Foaming of flat glass cullet using Si3N4 and MnO2 powders[J]. Ceram Inter, 2009, 35(5):1953–1959.
[20] FERNANDES H R, TULYAGANOV D U, FERREIRA J M F.Production and characterisation of glass ceramic foams from recycled raw materials[J]. Adv Appl Ceram, 2009, 108(1):9–13.
[21] WU J P, BOCCACCINI A R, LEE P D, et al. Glass ceramic foams from coal ash and waste glass:production and characterisation[J]. Adv Appl Ceram, 2006, 105(1):32–39.
[22] FERNANDES H R, TULYAGANOV D U, FERREIRA J M F.Preparation and characterization of foams from sheet glass and fly ash using carbonates as foaming agents[J]. Ceram Inter, 2009, 35(1):229–235.
[23] WEI Y L, CHENG S, HOU K T, et al. Effect of calcium compounds on lightweight aggregates prepared by firing a mixture of coal fly ash and waste glass[J]. Ceram Inter, 2017, 43(17):15573–15579.
[24] TUAN B L A, HWANG C L, LIN K L, et al. Development of lightweight aggregate from sewage sludge and waste glass powder for concrete[J]. Constr Building Mater, 2013, 47:334–339.
[25] WANG H, SUN Y, LIU L, et al. Integrated utilization of fly ash and waste glass for synthesis of foam/dense bi-layered insulation ceramic tile[J]. Energy Buildings, 2018, 168:67–75.
[26] TAURINO R L I, BARBIERI L, ET AL. Glass-ceramic foams from borosilicate glass waste[J]. Inter J Appl Glass Sci, 2014, 5(2):136–145.
[27] EWAIS E M M, ATTIA M A A, ELAMIR A A M, et al. Optimal conditions and significant factors for fabrication of soda lime glass foam from industrial waste using nano AlN[J]. J Alloys Comp, 2018,747:408–415.
[28] ARULRAJAH A, DISFANI M M, MAGHOOLPILEHROOD F, et al.Engineering and environmental properties of foamed recycled glass as a lightweight engineering material[J]. J Cleaner Prod, 2015, 94:369–375.
[29] PONSOT I, BERNARDO E. Self glazed glass ceramic foams from metallurgical slag and recycled glass[J]. J Cleaner Prod, 2013, 59:245–250.
[30] LEBULLENGER R, CHENU S, ROCHERULLéJ, et al. Glass foams for environmental applications[J]. Ceram Inter, 2010, 356(44–49):2562–2568.
[31] MARANGONI M, SECCO M, PARISATTO M, et al. Cellular glass ceramics from a self foaming mixture of glass and basalt scoria[J].Ceram Inter, 2014, 403:38–46.
[32] PETERSEN R R, K?NIG J, YUE Y. The viscosity window of the silicate glass foam production[J]. Ceram Inter, 2017, 456:49–54.
[33] BAI J, YANG X, XU S, et al. Preparation of foam glass from waste glass and fly ash[J]. Mater Lett, 2014, 136:52–54.
[34] DING L, NING W, WANG Q, et al. Preparation and characterization of glass ceramic foams from blast furnace slag and waste glass[J].Mater Lett, 2015, 141:327–329.
[35] WANG H, FENG K, ZHOU Y, et al. Effects of Na2B4O7·5H2O on the properties of foam glass from waste glass and titania-bearing blast furnace slag[J]. Mater Lett, 2014, 132:176–178.
[36] WANG X, FENG D, ZHANG B, et al. Effect of KNO3 on the microstruture and physical properties of glass foam from solid waste glass and SiC powder[J]. Mater Lett, 2016, 169:21–23.
[37] YIN H, MA M, BAI J, et al. Fabrication of foam glass from iron tailings[J]. Mater Lett, 2016, 185:511–513.
[38] PETRELLA A, PETRUZZELLI V, BASILE T, et al. Recycled porous glass from municipal/industrial solid wastes sorting operations as a lead ion sorbent from waste waters[J]. React Funct Polym, 2010, 70(4):203–209.
[39] AYADI A, STITI N, BOUMCHEDDA K, et al. Elaboration and characterization of porous granules based on waste glass[J]. Powder Technol, 2011, 208(2):423–426.
[40] BENTO A C, KUBASKI E T, SEQUINEL T, et al. Glass foam of macroporosity using glass waste and sodium hydroxide as the foaming agent[J]. Ceram Inter, 2013, 39(3):2423–2430.
[41] CAO J, LU J, JIANG L, et al. Sinterability, microstructure and compressive strength of porous glass ceramics from metallurgical silicon slag and waste glass[J]. Ceram Inter, 2016, 42(8):10079–10084.
[42] CHAKARTNARODOM P, INEURE P. Foam glass development using glass cullet and fly ash or rice husk ash as the raw materials[J]. Key Eng Mater, 2014, 608:73–78.
[43] K?NIG J, PETERSEN R R, YUE Y. Influence of the glass particle size on the foaming process and physical characteristics of foam glasses[J].J Non-Crys Solids, 2016, 447:190–197.
[44] BERNARDO E, ALBERTINI F. Glass foams from dismantled cathode ray tubes[J]. Ceram Inter, 2006, 32(6):603–608.
[45] FERNANDES H R, FERREIRA D D, ANDREOLA F, et al.Environmental friendly management of CRT glass by foaming with waste egg shells, calcite or dolomite[J]. Ceram Inter, 2014, 40(8):13371–13379.
[46] K?NIG J, PETERSEN R R, YUE Y. Fabrication of highly insulating foam glass made from CRT panel glass[J]. Ceram Inter, 2015, 41(8):9793–9800.
[47] K?NIG J, PETERSEN R R, YUE Y, et al. Gas-releasing reactions in foam glass formation using carbon and MnxOy as the foaming agents[J]. Ceram Inter, 2017, 43(5):4638–4646.
[48] MéAR F, YOT P, VIENNOIS R, et al. Mechanical behaviour and thermal and electrical properties of foam glass[J]. Ceram Inter, 2007,33(4):543–550.
[49] ZHANG Q, HE F, SHU H, et al. Preparation of high strength glass ceramic foams from waste cathode ray tube and germanium tailings[J].Constr Building Mater, 2016, 111:105–110.
[50] PETERSEN R R K J, SMEDSKJAER M M. Foaming of CRT panel glass powder using Na2CO3[J]. Glass Technol, 2014, 55(1):1–6.
[51] MUCSI G, CS?KE B, KERTéSZ M, et al. Physical characteristics and technology of glass foam from waste cathode ray tube glass[J]. J Mater, 2013, 2013:1–11.
[52] PETERSEN R R, K?NIG J, SMEDSKJAER M M, et al. Effect of Na2CO3 as foaming agent on dynamics and structure of foam glass melts[J]. J Non-Cryst Solids, 2014, 400:1–5.
[53] K?NIG J, PETERSEN R R, YUE Y. Influence of the glass calcium carbonate mixture's characteristics on the foaming process and the properties of the foam glass[J]. J Eur Ceram Soc, 2014, 34(6):1591–1598.
[54] GUO H W, GONG Y X, GAO S Y. Preparation of high strength foam glass ceramics from waste cathode ray tube[J]. Mater Lett, 2010, 64(8):997–999.
[55] MéAR F, YOT P, RIBES M. Effects of temperature, reaction time and reducing agent content on the synthesis of macroporous foam glasses from waste funnel glasses[J]. Mater Lett, 2006, 60(7):929–934.
[56] MEAR F, YOT P, CAMBON M, et al. Characterisation of porous glasses prepared from cathode ray tube(CRT)[J]. Powder Technol,2006, 162(1):59–63.
[57] CHEN B, LUO Z, LU A. Preparation of sintered foam glass with high fly ash content[J]. Mater Lett, 2011, 65(23/24):3555–3558.
[58] CHEN B, WANG K, CHEN X, et al. Study of foam glass with high content of fly ash using calcium carbonate as foaming agent[J]. Mater Lett, 2012, 79:263–265.
[59] LI J, ZHUANG X, MONFORT E, et al. Utilization of coal fly ash from a Chinese power plant for manufacturing highly insulating foam glass:Implications of physical, mechanical properties and environmental features[J]. Constr Building Mater, 2018, 175:64–76.
[60] GUO Y, ZHANG Y, HUANG H, et al. Novel glass ceramic foams materials based on red mud[J]. Ceram Inter, 2014, 40(5):6677–6683.
[61] KORAT L, DUCMAN V, LEGAT A, et al. Characterisation of the pore-forming process in lightweight aggregate based on silica sludge by means of X-ray micro-tomography(micro-CT)and mercury intrusion porosimetry(MIP)[J]. Ceram Inter, 2013, 39(6):6997–7005.
[62] ZHOU M, GE X, WANG H, et al. Effect of the Ca O content and decomposition of calcium-containing minerals on properties and microstructure of ceramic foams from fly ash[J]. Ceram Inter, 2017,43(12):9451–9457.
[63] CHEN H J, WANG S Y, TANG C W. Reuse of incineration fly ashes and reaction ashes for manufacturing lightweight aggregate[J]. Constr Building Mater, 2010, 24(1):46–55.
[64] GONZáLEZ-CORROCHANO B, ALONSO-AZCáRATE J, RODAS M. Characterization of lightweight aggregates manufactured from washing aggregate sludge and fly ash[J]. Resour, Conserv Recycl,2009, 53(10):571–581.
[65] HOU L J, LIU T Y, LU A X. Red mud and fly ash-based ceramic foams using starch and manganese dioxide as foaming agent[J].Transact Nonferrous Met Soc China, 2017, 27(3):591–598.
[66] LUO Y, ZHENG S, MA S, et al. Preparation of sintered foamed ceramics derived entirely from coal fly ash[J]. Constr Building Mater,2018, 163:529–538.
[67] CHEN X, LU A, QU G. Preparation and characterization of foam ceramics from red mud and fly ash using sodium silicate as foaming agent[J]. Ceram Inter, 2013, 39(2):1923–1929.
[68] LIU T, TANG Y, LI Z, et al. Red mud and fly ash incorporation for lightweight foamed ceramics using lead-zinc mine tailings as foaming agent[J]. Mater Lett, 2016, 183:362–364.
[69] LIAO Y C, HUANG C Y. Glass foam from the mixture of reservoir sediment and Na2CO3[J]. Ceram Inter, 2012, 38(5):4415–4520.
[70] LIU M, LIU X, WANG W, et al. Effect of SiO2 and Al2O3 on characteristics of lightweight aggregate made from sewage sludge and river sediment[J]. Ceram Inter, 2018, 44(4):4313–4319.
[71] GONZáLEZ-CORROCHANO B, ALONSO-AZCáRATE J,RODRíGUEZ L, et al. Valorization of washing aggregate sludge and sewage sludge for lightweight aggregates production[J]. Constr Building Mater, 2016, 116:252–262.
[72] FRANUS M, BARNAT-HUNEK D, WDOWIN M. Utilization of sewage sludge in the manufacture of lightweight aggregate[J]. Environ Monit Assess, 2016, 188:10.
[73] GONZALEZ-CORROCHANO B, ALONSO-AZCARATE J, RODAS M. Production of lightweight aggregates from mining and industrial wastes[J]. J Environ Manage, 2009, 90(8):2801–2812.
[74] LIU M, WANG C, BAI Y, et al. Effects of sintering temperature on the characteristics of lightweight aggregate made from sewage sludge and river sediment[J]. J Alloys Comp, 2018, 748:522–527.
[75] LIU M, XU G, LI G. Effect of the ratio of components on the characteristics of lightweight aggregate made from sewage sludge and river sediment[J]. Process Saf Environ Prot, 2017, 105:109–116.
[76] LAU P C, TEO D C L, MANNAN M A. Mechanical, durability and microstructure properties of lightweight concrete using aggregate made from lime-treated sewage sludge and palm oil fuel ash[J]. Constr Building Mater, 2018, 176:24–34.
[77] LIU T, LI X, GUAN L, et al. Low-cost and environment-friendly ceramic foams made from leadzinc mine tailings and red mud:Foaming mechanism, physical, mechanical and chemical properties[J].Ceram Inter, 2016, 42(1):1733–1739.
[78] XI X, XIONG H, SHUI A, et al. Foaming inhibition of SiC-containing porcelain ceramics by using Si powders during sintering[J]. J Eur Ceram Soc, 2017, 37(15):5044–5050.
[79] GUO Y, ZHANG Y, HUANG H, et al. Novel glass ceramic foams materials based on polishing porcelain waste using the carbon ash waste as foaming agent[J]. Constr Building Mater, 2016, 125:1093–1100.
[80] XI X, SHUI A, LI Y, et al. Effects of magnesium oxychloride and silicon carbide additives on the foaming property during firing for porcelain ceramics and their microstructure[J]. J Eur Ceram Soc, 2012,32(12):3035–3041.
[81] WANG H, CHEN Z, LIU L, et al. Synthesis of a foam ceramic based on ceramic tile polishing waste using SiC as foaming agent[J]. Ceram Inter, 2018, 44(9):10078–10086.
[82] VOLLAND S, BR?TZ J. Lightweight aggregates produced from sand sludge and zeolitic rocks[J]. Constr Building Mater, 2015, 85:22–29.
[83] VOLLAND S, KAZMINA O, VERESHCHAGIN V, et al. Recycling of sand sludge as a resource for lightweight aggregates[J]. Constr Building Mater, 2014, 52:361–365.
[84] VOLLAND S. Influence of the mechanical activation of raw mixes on the properties of foam glass from sand sludge[J]. Constr Building Mater, 2016, 125:119–126.
[85] MARTíNEZ J D, BETANCOURT-PARRA S, CARVAJAL-MARíN I,et al. Ceramic light-weight aggregates production from petrochemical wastes and carbonates(NaHCO3 and CaCO3)as expansion agents[J].Constr Building Mater, 2018, 180:124–133.
[86] MORENO-MAROTO J M, GONZALEZ-CORROCHANO B,ALONSO-AZCARATE J, et al. Development of lightweight aggregates from stone cutting sludge, plastic wastes and sepiolite rejections for agricultural and environmental purposes[J]. J Environ Manage, 2017, 200:229–242.
[87] MORENO-MAROTO J M, GONZáLEZ-CORROCHANO B,ALONSO-AZCáRATE J, et al. Manufacturing of lightweight aggregates with carbon fiber and mineral wastes[J]. Cem Concr Compos, 2017, 83:335–348.
[88] JIANG C, HUANG S, LI G, et al. Formation of closed-pore foam ceramic from granite scraps[J]. Ceram Inter, 2018, 44(3):3469–3471.
[89] SOLTAN A M M, KAHL W A, ABD ELRAOOF F, et al. Lightweight aggregates from mixtures of granite wastes with clay[J]. J Cleaner Product, 2016, 117:139–149.
[90] GONZáLEZ-CORROCHANO B, ALONSO-AZCáRATE J, RODAS M. Effect of prefiring and firing dwell times on the properties of artificial lightweight aggregates[J]. Constr Building Mater, 2014, 53:91–101.
[91] MUELLER A, SCHNELL A, RUEBNER K. The manufacture of lightweight aggregates from recycled masonry rubble[J]. Constr Building Mater, 2015, 98:376–387.
[92] GE X, ZHOU M, WANG H, et al. Preparation and characterization of ceramic foams from chromium slag and coal bottom ash[J]. Ceram Inter, 2018, 44(10):11888–11891.
[93] WEI Y L, KO G W. Recycling steel wastewater sludges as raw materials for preparing lightweight aggregates[J]. J Cleaner Product,2017, 165:905–916.
[94] CHRISTOGEROU A, KAVAS T, ANGELOPOULOS G N. Synergy of boron containing solid wastes and fructose for the production of lightweight aggregates:microstructure and properties[J]. Waste Biomass Valorizat, 2013, 5(4):733–741.
[95] KAVAS T, CHRISTOGEROU A, PONTIKES Y, et al. Valorisation of different types of boron containing wastes for the production of lightweight aggregates[J]. J Hazard Mater, 2011, 185(2/3):1381–1389.
[96] HAN M C, HAN D, SHIN J K. Use of bottom ash and stone dust to make lightweight aggregate[J]. Constr Building Mater, 2015, 99:192–199.
[97] BAINO F, FERRARIS M. Production and characterization of ceramic foams derivevitrified bottom ashes[J]. Mater Lett, 2019, 236:281–284.
[98] ASSEFI M, MAROUFI S, MANSURI I, et al. High strength glass foams recycled from LCD waste screens for insulation application[J].J Cleaner Product, 2021, 280:124311.
[99] ZHU X, SUN N, HUANG Y, et al. Preparation of full tailings-based foam ceramics and auxiliary foaming effect of vanadium-titanium magnetite tailings[J]. J Non-Cryst Solids, 2021, 571:121063.
[100] CHEN Z, WANG H, JI R, et al. Reuse of mineral wool waste and recycled glass in ceramic foams[J]. Ceram Inter, 2019, 45(12):15057–15064.
[101] BAI J, YANG X, SHI Y, et al. Fabrication of directional SiC porous ceramics using Fe2O3 as pore-forming agent[J]. Mater Lett, 2012, 78:192–194.
[102] XI X, XU L, SHUI A, et al. Effect of silicon carbide particle size and Ca O content on foaming properties during firing and microstructure of porcelain ceramics[J]. Ceram Inter, 2014, 40(8):12931–12938.
[103] JI R, ZHANG Z, HE Y, et al. Synthesis, characterization and modeling of new building insulation material using ceramic polishing waste residue[J]. Constr Building Mater, 2015, 85:119–126.
[104] GARCíA-TEN J, SABURIT A, BERNARDO E, et al. Development of lightweight porcelain stoneware tiles using foaming agents[J]. J Eur Ceram Soc, 2012, 32(4):745–752.
[105] ZHAI C, LI Z, ZHU Y, et al. Effects of Sb2O3 on the mechanical properties of the borosilicate foam glasses sintered at low temperature[J]. Adv Mater Sci Eng, 2014, 2014:1–6.
[106] HWANG J Y, YU J H, KANG K. A study of the gasification of carbon black with molten salt of Li2CO3 and K2CO3 for application in the external anode media of a direct carbon fuel cell[J]. Currt Appl Phys,2015, 15(12):1580–1586.
[107]?STERGAARD M B, PETERSEN R R, K?NIG J, et al. Effect of alkali phosphate content on foaming of CRT panel glass using Mn3O4and carbon as foaming agents[J]. J Non-Cryst Solids, 2018, 482:217–222.
[108] SHI H, FENG K Q, WANG H B, et al. Influence of aluminium nitride as a foaming agent on the preparation of foam glass ceramics from high-titanium blast furnace slag[J]. Inter J Miner, Metall Mater, 2016,23(5):595–600.
[109] K?NIG J P R R, YUE Y. Influence of the glass calcium carbonate mixture's characteristics on the foaming process and the properties of the foam glass[J]. J Eur Ceram Soc, 2014, 34(6):1591–1598.
[110] DONDI M, CAPPELLETTI P, D’AMORE M, et al. Lightweight aggregates from waste materials:Reappraisal of expansion behavior and prediction schemes for bloating[J]. Constr Building Mater, 2016,127:394–409.
[111] CHINNAM R K, FRANCIS A A, WILL J, et al. Functional glasses and glass ceramics derived from iron rich waste and combination of industrial residues[J]. J Non-Cryst Solids, 2013, 365:63–74.
[112] DUCMAN V, KORAT L, LEGAT A, et al. X-ray micro-tomography investigation of the foaming process in the system of waste glass silica mud-MnO2[J]. Mater Charact, 2013, 86:316–321.
[113] PETERSEN R R, K?NIG J, YUE Y. The mechanism of foaming and thermal conductivity of glasses foamed with MnO2[J]. J Non-Cryst Solids, 2015, 425:74–82.
[114]王向科.以废玻璃为原料的泡沫玻璃的制备及性能探究[D].天津大学, 2016.WANG Xiangke. Preparation and properties of foam glass with waste glass as raw material(in Chinese, dissertation). Tianjin:Tianjin University, 2016.
[115] WANG H, FENG K, SUN Q. Effect of calcium carbonate on the preparation of glass ceramic foams from water-quenched titanium-bearing blast furnace slag and waste glass[J]. Advances in Appl Ceram, 2018, 117(5):312–318.
[116] KIM H, LEE S, HAN Y, et al. Control of pore size in ceramic foams:Influence of surfactant concentration[J]. Mater Chem and Phys, 2009,113(1):441–444.
[117] PTá?EK P, LANG K,?OUKAL F, et al. Preparation and properties of nanostructured ceramic foam from kaolinite[J]. Powder Technol,2014, 253:29–34.
[118] ZHANG J Y, FU Y M, ZENG X M. Compressive properties of open-cell ceramic foams[J]. Transact Nonferr Met Soc China, 2006,16:s453–s456.
[119] LIANG B, ZHANG M, LI H, et al. Preparation of ceramic foams from ceramic tile polishing waste and fly ash without added foaming agent[J]. Ceram Inter, 2021, 47(16):23338–23349.
[120] KUANG F H, WANG S M, GAO C, et al. Unique microstructure and thermal insulation property of a novel waste-utilized foam ceramic[J].J Mater Sci Technol, 2020, 48:175–179.
[121] FANG W, HOU L, LI Y. Foaming mechanism of SiC in steel slag foamed ceramics[J]. ISIJ Internat, 2021, 61(3):1043–1052.
[122] BENZERGA R, LAUR V, LEBULLENGER R, et al. Waste glass recycling:A step toward microwave applications[J]. Mater Res Bull,2015, 67:261–265.
[123] ABBASI S, MIRKAZEMI S M, ZIAEE A, et al. The effects of Fe2O3and Co3O4 on microstructure and properties of foam glass from soda lime waste glasses[J]. Glass Phys Chem, 2014, 40(2):173–179.
[124] GALLO L S A, DE MARCHI MOSCA T, TEIDER B H, et al. Effects of lithium oxide on the crystallization kinetics of Na2O·2CaO·3SiO2glass[J]. J Non-Cryst Solids, 2015, 408:102–114.
[125] LI J, CAO J, XU B, et al. Effect of gas-solid interface on pore wall microstructure evolution during thermal melting of foamed ceramics[J]. J Therm Anal Calorimetry, 2021, 147(3):2035–2046.
[126]李伟光.碱铝硅质尾矿发泡陶瓷材料的研究与应用[D].北京建筑大学, 2018.LI Weiguang. Research and application of foamed ceramic material from alkali aluminum siliceous tailings(in Chinese, dissertation).Beijing:Beijing University of Civil Engineering and Architecture,2018.
[127] YAN Z, WANG Z, LIU H, et al. Decomposition and solid reactions of calcium sulfate doped with SiO2, Fe2O3 and Al2O3[J]. J Anal Appl Pyrolysis, 2015, 113:491–498.
[128] ATTILA Y, GüDEN M, TA?DEMIRCI A. Foam glass processing using a polishing glass powder residue[J]. Ceram Inter, 2013, 39(5):5869–5877.
[129] HASHEMINIA S, NEMATI A, EFTEKHARI YEKTA B, et al.Preparation and characterisation of diopside-based glass ceramic foams[J]. Ceram Inter, 2012, 38(3):2005–2010.
[130] VERNEROVáM, CINCIBUSOVáP, KLOU?EK J, et al. Method of examination of bubble nucleation in glass melts[J]. J Non-Cryst Solids,2015, 411:59–67.
[131] AVINASH G, HARIKA V, SANDEEPIKA C, et al. Pore size control in aluminium foam by standardizing bubble rise velocity and melt viscosity[J]. IOP Conf Ser:Mater Sci Eng, 2018, 338:012010.
[132] ZHANG J, LIU B, ZHANG S. A review of glass ceramic foams prepared from solid wastes:processing, heavy-metal solidification and volatilization, applications[J]. Sci Tot Environ, 2021, 781:146727.
[133] PABST W, UHLí?OVáT, GREGOROVáE, et al. Young’s modulus and thermal conductivity of closed-cell, open-cell and inverse ceramic foams-model-based predictions, cross-property predictions and numerical calculations[J]. J Eur Ceram Soc, 2018, 38(6):2570–2578.
[134]赵翀,胡飞,张国涛,等.闭孔泡沫陶瓷的研究现状及耐火极限问题[J].中国陶瓷, 57(5):50–52.ZHAO Chong, HU Fei, ZHANG Guotao, et. al. China Ceram(in Chinese), 57(5):50–52.
[135] CHUANG K H, LU C H, CHEN J C, et al. Reuse of bottom ash and fly ash from mechanical-bed and fluidized-bed municipal incinerators in manufacturing lightweight aggregates[J]. Ceram Inter, 2018, 44(11):12691–12696.
[136] LAUR V, BENZERGA R, LEBULLENGER R, et al. Green foams for microwave absorbing applications:synthesis and characterization[J].Mater Res Bull, 2017, 96:100–106.
[137] BENHAOUA F, AYADI A, STITI N, et al. Elaboration and characterization of a cellular glass based cullet loaded with carbon fibers[J]. Mater Lett, 2015, 160:278–281.
[138]张文毓.泡沫陶瓷的研究现状与应用进展[J].陶瓷, 2019(11):10–13.ZHANG Wenyu. Ceramic(in Chinese), 2019,(11):10–13.
[139] RANGEL E M, MELO C C N D, MACHADO F M. Ceramic foam decorated with ZnO for photodegradation of Rhodamine B dye[J].BOL SOC ESP CERAM V, 2019, 58(3):134–140.
[140] RAN H T, TU S C, LI C, et al. Preparation and oil removal efficiency of foamed ceramics from red mud and fly ash[J]. Transact Mater Heat Treat, 2016, 37:31–35.
[141] JIANG C C, ZHANG X Z, WANG D, et al. Recycling fly ash and red mud to manufacture self-foaming ceramic foams[J]. Ceram Silikaty,2020, 64(4):371–378.
基本信息:
DOI：10.14062/j.issn.0454-5648.20220373
中图分类号:TQ174.1;X705
引用信息:
[1]姜葱葱,董祎然,黄世峰,等.基于原位发泡工艺的固废基发泡陶瓷研究进展[J].硅酸盐学报,2022,50(09):2510-2526.DOI:10.14062/j.issn.0454-5648.20220373.
基金信息:
山东省泰山学者攀登计划; 济南市支持顶尖人才(团队)创新创业“一事一议”项目; 济南市新高校20条院所科研带头人工作室(2021GXRC087)
2022-08-12
2022-08-12
2022-08-12