| 1,470 | 39 | 118 |
| 下载次数 | 被引频次 | 阅读次数 |
近年来,天然植物纤维用来增强水泥基材料受到了广泛关注。与合成纤维相比,天然植物纤维具有绿色环保、质量轻、低成本、可再生等众多的优点,在许多领域都有大量应用。然而,天然植物纤维易吸水膨胀、与水泥基体相容性差,不能直接应用于水泥基材料中,需通过对天然植物纤维进行适当的预处理改善其对水泥基复合材料性能的不利影响。基于天然植物纤维的结构及材料组成,综述了天然植物纤维的水处理、涂覆处理、蒸汽处理、碱处理、酸处理、硅烷偶联剂处理、混合处理等方法以及这些预处理方法对天然植物纤维增强水泥基复合材料性能影响的最新进展。
Abstract：The use of natural plant fibers to reinforce cement-based materials has attracted recent attention. Compared with synthetic fibers, natural plant fibers have many advantages, such as green environmental protection, light weight, low cost, renewable, etc., and are widely used in many fields. However, natural plant fibers cannot be directly applied to cement-based materials since they are easy to absorb water and swell and have a poor compatibility with cement matrix. Therefore, a proper pretreatment of natural plant fibers is needed to improve the adverse effects of natural plant fibers on the properties of cement-based composites. This review represented,recent work on the development of different pretreatment methods for natural plant fibers(i.e., water treatment, coating treatment,steam treatment, alkali treatment, acid treatment, silane coupling agent treatment and mixing treatment) based on the structure and material composition of natural plant fibers, as well as the effect of the pretreatment method on the properties of natural plant fiber reinforced cement-based composites.
[1]侯秀英,黄祖泰,杨文斌,等.植物纤维在复合材料中的应用与发展[J].纤维素科学与技术, 2005(4):55–59.HOU Xiuying, HUANG Zutai, YANG Wenbin, et al. J Cellul Sci Technol(in Chinese), 2005(4):55–59.
[2] ROUT J, MISRA M, TRIPATHY S S, et al. The influence of fibre treatment on the performance of coir-polyester composites[J]. Compos Sci Technol, 2001, 61(9):1303–1310.
[3]马玉峰,张伟,王春鹏,等.天然植物纤维复合材料界面改性研究进展[J].材料导报, 2011, 25(19):81–84, 89.MA Yufeng, ZHANG Wei, WANG Chunpeng, et al. Mater Rep(in Chinese), 2011, 25(19):81–84,89.
[4] PICKERING K L, EFENDY M G A, LE T M. A review of recent developments in natural fibre composites and their mechanical performance[J]. Composites Part A:Appl Sci Manuf, 2016, 83:98–112.
[5]罗齐鸣,刘肖凡.植物纤维改性砂浆力学性能试验及机理研究[J].混凝土, 2018(1):116–120.LUO Qiming, LIU Xiaofan. Concrete(in Chinese), 2018(1):116–120.
[6] VAN DE VELDE K, KIEKENS P. Thermal degradation of flax:The determination of kinetic parameters with thermogravimetric analysis[J]. J Appl Polym Sci, 2002, 83(12):2634–2643.
[7] FREDERICK T W, NORMAN W. Natural fibers, plastics and composites[M]. Boston:Springer Science&Business Media, 2004:3–7.
[8]许瑞,徐闻,范英,等.苎麻/LLDPE复合材料力学性能的研究[J].复合材料学报, 2001(4):23–28.XU Rui, XU Wen, FAN Ying,et al. Acta Mater Compos Sin(in Chinese), 2001(4):23–28.
[9] BLEDZKI A K, GASSAN J. Composites reinforced with cellulose based fibres[J]. Progr Polym Sci, 1999, 24(2):221–274.
[10] PAUL A, JOSEPH K, THOMAS S. Effect of surface treatments on the electrical properties of low-density polyethylene composites reinforced with short sisal fibers[J]. Compos Sci Technol, 1997, 57(1):67–79.
[11] ROUISON D, SAIN M, COUTURIER M. Resin transfer molding of natural fiber reinforced composites:cure simulation[J]. Compos Sci Technol, 2004, 64(5):629–644.
[12] FARUK O, BLEDZKI A K, FINK H P, et al. Biocomposites reinforced with natural fibers:2000-2010[J]. Progress Polym Sci, 2012,37(11):1552–1596.
[13] MOHANTY A K, MISRA M, DRZAL L T. Surface modifications of natural fibers and performance of the resulting biocomposites:An overview[J]. Compos Interfaces, 2001, 8(5):313–343.
[14] ROWELL R M, ROWELL J. Paper and composites from agro-based resources[M]. Florida:CRC Press, 1996:63–78.
[15] LI X, TABIL L G, PANIGRAHI S. Chemical treatments of natural fiber for use in natural fiber-reinforced composites:a review[J]. J Polym Environ, 2007, 15(1):25–33.
[16] GANSTER J, FINK H P. Novel cellulose fibre reinforced thermoplastic materials[J]. Cellulose, 2006, 13(3):271–280.
[17] SCALICI T, PITARRESI G, BADAGLIACCO D, et al. Mechanical properties of basalt fiber reinforced composites manufactured with different vacuum assisted impregnation techniques[J]. Composites Part B:Eng, 2016, 104:35–43.
[18]孔葆青,魏丽芬.植物纤维的化学组成与纸浆性能[J].湖北造纸,2004(2):6–7.KONG Baoqing, WEI Lifen. Hubei Pap(in Chinese), 2004(2):6–7.
[19] ALI A, SHAKER K, NAWAB Y, et al. Hydrophobic treatment of natural fibers and their composites—A review[J]. J Ind Text, 2018,47(8):2153–2183.
[20]韩宁宁,王训遒,陈琦,等.植物纤维改性方法及其增强复合材料研究进展[J].化工新型材料, 2020, 48(3):9–13.HAN Ningning, WANG Xunqiu, CHEN Qi, et al. New Chem Mater(in Chinese), 2020, 48(3):9–13.
[21] ROWELL R M, HAN J S, ROWELL J S. Characterization and factors effecting fiber properties[J]. Nat Polym Agrofibers Based Compos,2000:115–34.
[22] SORIEUL M, DICKSON A, HILL S J, et al. Plant fibre:molecular structure and biomechanical properties, of a complex living material,influencing its deconstruction towards a biobased composite[J].Materials, 2016, 9(8):618.
[23]李雄彪,张金忠.半纤维素的化学结构和生理功能[J].植物学通报,1994(1):27–33, 42.LI Xiongbiao, ZHANG Jinzhong. Chin Bull Bot(in Chinese), 1994(1):27–33,42.
[24] FUQUA M A, HUO S, ULVEN C A. Natural fiber reinforced composites[J]. Polym Rev, 2012, 52(3):259–320.
[25] MUKESH, GODARA S S. Effect of chemical modification of fiber surface on natural fiber composites:A review[J]. Mater Today:Proc,2019, 18:3428–3434.
[26]杨倩,刘贵锋,吴国民,等.木质素化学降解及其在聚合物材料中应用的研究进展[J].生物质化学工程, 2020, 54(2):40-50.YANG Qian, LIU Guifeng, WU Guomin, et al. Biomass Chem Eng(in Chinese), 2020, 54(2):40–50.
[27] WANG S, RU B, DAI G, et al. Mechanism study on the pyrolysis of a syntheticβ-O-4 dimer as lignin model compound[J]. Proc Combust Inst, 2017, 36(2):2225–2233.
[28] DAI G, WANG K, WANG G, et al. Initial pyrolysis mechanism of cellulose revealed by in-situ DRIFT analysis and theoretical calculation[J]. Combust Flame, 2019, 208:273–280.
[29] MA Z, WANG J, ZHOU H, et al. Relationship of thermal degradation behavior and chemical structure of lignin isolated from palm kernel shell under different process severities[J]. Fuel Proc Technol, 2018,181:142–156.
[30]付伟,廖祥儒,王俊峰,等.植物体内的木质素[J].生物学通报,2004, 39(2):12–14.FU Wei, LIAO Xiangru, WANG Junfeng, er al. Bull Biol(in Chinese),2004, 39(2):12–14.
[31]邱学青,欧阳新平,杨东杰.工业木质素高效利用的改性理论与技术[M].北京:科学出版社, 2013:1–3.
[32]蒋挺大.木质素[M].北京:化学工业出版社, 2009:1–4.
[33] TONOLI G H D, BELGACEM M N, SIQUEIRA G, et al. Processing and dimensional changes of cement based composites reinforced with surface-treated cellulose fibres[J]. Cem Concr Compos, 2013, 37:68–75.
[34] TOLEDO F R D, GHAVAMI K, SANJUáN M A, et al. Free,restrained and drying shrinkage of cement mortar composites reinforced with vegetable fibres[J]. Cem Concr Compos, 2005, 27(5):537–546.
[35] ABIOLA O S. Natural Fibre Cement Composites[M]. London:Woodhead Publishing, 2017:205–214.
[36] SELLAMI A, MERZOUD M, AMZIANE S. Improvement of mechanical properties of green concrete by treatment of the vegetals fibers[J]. Constr Build Mater, 2013, 47:1117–1124.
[37] PICKERING K L, EFENDY M G A, LE T M. A review of recent developments in natural fibre composites and their mechanical performance[J]. Composites Part A:Appl Sci Manuf, 2016, 83:98–112.
[38]张龙飞,陈志林.绿色纤维增强水泥基复合材料研究[J].建筑技术,2016, 47(4):349–352.ZHANG Longfei, CHEN Zhilin. Archit Technol(in Chinese), 2016,47(4):349–352.
[39] SEDAN D, PAGNOUX C, CHOTARD T, et al. Effect of calcium rich and alkaline solutions on the chemical behaviour of hemp fibres[J]. J Mater Sci, 2007, 42(22):9336–9342.
[40] FRYBORT S, MAURITZ R, TEISCHINGER A, et al. Cement bonded composites–A mechanical review[J]. BioResources, 2008, 3(2):602–626.
[41] WEI Y M, TOMITA B. Effects of five additive materials on mechanical and dimensional properties of wood cement-bonded boards[J]. J Wood Sci, 2001, 47(6):437–444.
[42] RONG M Z, ZHANG M Q, LIU Y, et al. The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy composites[J]. Compos Sci Technol, 2001, 61(10):1437–1447.
[43] LE DUIGOU A, BOURMAUD A, BALNOIS E, et al. Improving the interfacial properties between flax fibres and PLLA by a water fibre treatment and drying cycle[J]. Ind Crop Prod, 2012, 39:31–39.
[44] DING X Y, TIAN G Y, GE A M. Comparative study on properties of different straw fiber cement composites[A]//The 3rd International Conference on New Material and Chemical Industry[C], Sanya, China,2019:479.
[45] BEDERINA M, BELHADJ B, AMMARI M S, et al. Improvement of the properties of a sand concrete containing barley straws–Treatment of the barley straws[J]. Constr Build Mater, 2016, 115:464–477.
[46] AMIANDAMHEN S O, IZEKOR D N, BALOGUM A O.Performance characteristics of treated kenaf bast fibre reinforced cement composite[J]. J Indian Acad Wood Sci, 2016, 13(2):156–160.
[47] SAWSEN C, FOUZIA K, MOHAMED B, et al. Effect of flax fibers treatments on the rheological and the mechanical behavior of a cement composite[J]. Constr Build Mater, 2015, 79:229–235.
[48] RABMA S, NARKSITIPAN S, JAITANONG N. Coconut fiber reinforced cement-based composites[J]. Solid State Phenom, 2020, 302:101–106.
[49] ASASUTJARIT C, HIRUNLABH J, KHEDARI J, et al. Development of coconut coir-based lightweight cement board[J]. Constr Build Mater,2007, 21(2):277–288.
[50] PAGE J, KHADRAOUI F, GOMINA M, et al. Influence of different surface treatments on the water absorption capacity of flax fibres:Rheology of fresh reinforced-mortars and mechanical properties in the hardened state[J]. Constr Build Mater, 2019, 199:424–434.
[51] TOLEDO FILHO R D, de ANDRADE SILVA F, FAIRBAIRN E M R,et al. Durability of compression molded sisal fiber reinforced mortar laminates[J]. Constr build Mater, 2009, 23(6):2409–2420.
[52] LING T C, POON C S. Feasible use of large volumes of GGBS in100%recycled glass architectural mortar[J]. Cem Concr Compos, 2014,53:350–356.
[53] TOLEDO FILHO R D, SCRIVENER K, ENGLAND G L, et al.Durability of alkali-sensitive sisal and coconut fibres in cement mortar composites[J]. Cem Concr Compos, 2000, 22(2):127–143.
[54] SAWSEN C, GOMINA M, KHADRAOUI F, et al. Dependence of the properties of cementitious composites on the nature of the hydraulic binder coating the reinforcing flax fibers[J]. J Mech Civ Eng, 2017,14(6):27–33.
[55] KHAZMA M, GOULLIEUX A, QUENEUDEC M. Valorisation d’Anas de lin dans des composites cimentaires:étude comparative de l’impact des différents traitements sur les performances de la fraction végétale et des composites[A]//Congrès International Francophone NoMaD[C], Toulouse, France, 2012.
[56] SEDAN D, PAGNOUX C, SMITH A, et al. Propriétés mécaniques de matériaux enchevêtrésàbase de fibre de chanvre et matrice cimentaire[A]//18éme Congrès fran?ais de mécanique[C]. Grenoble, France, 2007:27–31.
[57] SELLAMI A, MERZOUD M, AMZIANE S. Improvement of mechanical properties of green concrete by treatment of the vegetals fibers[J]. Constr Build Mater, 2013, 47:1117–1124.
[58] NOZAHIC V, AMZIANE S. Influence of sunflower aggregates surface treatments on physical properties and adhesion with a mineral binder[J]. Composites Part A:Appl Sci Manuf, 2012, 43(11):1837–1849.
[59] MONREAL P, MBOUMBA-MAMBOUNDOU L B, DHEILLY R M,et al. Effects of aggregate coating on the hygral properties of lignocellulosic composites[J]. Cem Concr Compos, 2011, 33(2):301–308.
[60] BASTA A H, SAFAIN M Z, El-REWAINY I. Role of some treatments on enhancing the eco-friendly utilization of lignocellulosic wastes in production of cement-fiber bricks[J]. BioResources, 2011, 6(2):1359–1375.
[61] JIANG D, AN P, CUI S, et al. Effect of leaf fiber modification methods on mechanical and heat-insulating properties of leaf fiber cement-based composite materials[J]. J Build Eng, 2018, 19:573–583.
[62]祝瑜.预处理对水泥基稻草纤维材料性能影响的研究[D].哈尔滨:哈尔滨工业大学, 2008.ZHU Yu. Influence of pretreatment on cement based straw fibre material. Harbin:Harbin Institute Technology, 2008.
[63]郭戈,谢海泉,杨亚雷.利用麦秸纤维制备水泥复合板的研究[J].新型建筑材料, 2005(7):21–22.GUO Yi, XIE Haiquan, YANG Yalei. New Build Mater(in Chinese),2005(7):21–22.
[64] AHMAD H, FAN M, et al. Interfacial properties and structural performance of resin-coated natural fibre rebars within cementitious matrices[J]. Cem Concr Compos, 2018, 87:44–52.
[65]赵鑫,汪殿龙,孙占英.天然纤维表面改性及其在复合材料中的应用进展[J].工程塑料应用, 2020, 48(10):167–171.ZHAO Xin, WANG Dianlong, SUN Zhanying. Eng Plast Appl(in Chinese), 2020, 48(10):167–171.
[66] VELASQUEZ J A, FERRANDO F, FARRIOL X, et al. Binderless fiberboard from steam exploded Miscanthus sinensis[J]. Wood Sci Technol, 2003, 37(3):269–278.
[67] QUINTANA G, VELASQUEZ J, BETANCOURT S, et al. Binderless fiberboard from steam exploded banana bunch[J]. Ind Crop Prod, 2009,29(1):60–66.
[68] XIE X, GOU G, WEI X, et al. Influence of pretreatment of rice straw on hydration of straw fiber filled cement based composites[J]. Constr Build Mater, 2016, 113:449–455.
[69] DAS S, SAHA A K, CHOUDHURY P K, et al. Effect of steam pretreatment of jute fiber on dimensional stability of jute composite[J].J Appl Polym Sci, 2000, 76(11):1652–1661.
[70] SHAHIDI S, WIENER J, GHORANNEVISS M. Surface modification methods for improving the dyeability of textile fabrics[J]. Eco-Friendly Text Dyeing Finish, 2013, 10:53911.
[71]李昶, BLACKMAN B R K, SHI Z S.纤维增强复合材料胶接前的表面预处理方法综述[J](Eng).纤维复合材料, 2020, 37(3):109–122.LI Chang, BLACKMAN B R K, SHI Zhusheng. Fiber Compos(in Chinese), 2020, 37(3):109–122.
[72] MACEDO M J P, SILVA G S, FEITOR M C, et al. Surface modification of kapok fibers by cold plasma surface treatment[J]. J Mater Res Technol, 2020, 9(2):2467–2476.
[73] BARRA B N, SANTOS S F, BERGO P V A, et al. Residual sisal fibers treated by methane cold plasma discharge for potential application in cement based material[J]. Ind Crops Prod, 2015, 77:691–702.
[74] BLEDZKI A K, REIHMANE S, GASSAN J. Properties and modification methods for vegetable fibers for natural fiber composites[J]. J Appl Polym Sci, 1996, 59(8):1329–1336.
[75] MOHANTY A K, MISRA M, DRZAL L T. Surface modifications of natural fibers and performance of the resulting biocomposites:an overview[J]. Compos Interfaces, 2001, 8(5):313–343.
[76] AGRAWAL R, SAXENA N S, SREEKALA M S, et al. Effect of treatment on the thermal conductivity and thermal diffusivity of oil-palm-fiber-reinforced phenolformaldehyde composites[J]. J Polym Sci Part B:Polym Phys, 2000, 38(7):916–921.
[77] AZEVEDO A R G, MARVILA M T, TAYEH B A, et al.Technological performance of a?aínatural fibre reinforced cementbased mortars[J]. J Build Eng, 2021, 33:101675.
[78] LE TROEDEC M, DALMAY P, PATAPY C, et al. Mechanical properties of hemp-lime reinforced mortars:influence of the chemical treatment of fibers[J]. J Compos Mater, 2011, 45(22):2347–2357.
[79] BONNET-MASIMBERT P A, GAUVIN F, BROUWERS H J H, et al.Study of modifications on the chemical and mechanical compatibility between cement matrix and oil palm fibres[J]. Results Eng, 2020, 7:100150.
[80] PASCA S A, HARTLEY I D, REID M E, et al. Evaluation of Compatibility between Beetle-Killed Lodgepole Pine(Pinus Contorta var. Latifolia)wood with Portland Cement[J]. Materials, 2010, 3(12):5311–5319.
[81] REIS J M L. Sisal fiber polymer mortar composites:Introductory fracture mechanics approach[J]. Constr Build Mater, 2012, 37:177–180.
[82] FIORE V, BELLA G D, VALENZA A. The effect of alkaline treatment on mechanical properties of kenaf fibers and their epoxy composites[J]. Composites Part B:Eng, 2015, 68:14–21.
[83] SYMINGTON M C, DAVID-WEST O S, BANKS W M, et al. The effect of alkalisation on the mechanical properties of natural fibres[A]//13th European Conference on Composite Materials[C]. Stockholm,Sweden, 2008.
[84] OZERKAN N G, AHSAN B, MANSOUR S, et al. Mechanical performance and durability of treated palm fiber reinforced mortars[J].Int J Sustain Build Environ, 2013, 2(2):131–142.
[85] WEI J, MEYER C. Improving degradation resistance of sisal fiber in concrete through fiber surface treatment[J]. Appl Surf Sci, 2014, 289:511–523.
[86] AGRAWAL R, SAXENA N S, SHARMA K B, et al. Activation energy and crystallization kinetics of untreated and treated oil palm fibre reinforced phenol formaldehyde composites[J]. Mater Sci Eng:A,2000, 277(1-2):77–82.
[87] YU T, REN J, LI S, et al. Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites[J]. Composites Part A:Appl Sci Manuf, 2010, 41(4):499–505.
[88] VALADEZ-GONZALEZ A, CERVANTES-UC J M, OLAYO R, et al.Effect of fiber surface treatment on the fiber-matrix bond strength of natural fiber reinforced composites[J]. Composites Part B:Eng, 1999,30(3):309–320.
[89] FUQUA M A, HUO S, ULVEN C A. Natural fiber reinforced composites[J]. Polym Rev, 2012, 52(3):259–320.
[90] BLANKENHORN P R, BLANKENHORN B D, SILSBEE M R, et al.Effects of fiber surface treatments on mechanical properties of wood fiber–cement composites[J]. Cem Concr Res, 2001, 31(7):1049–1055.
[91]段焱侠,董莪,李发平,等.改性剑麻纤维对水泥砂浆的性能研究[J].武汉轻工大学学报, 2018, 37(3):60–63.DUAN Yanxia, DONG E, LI Faping, et al. J Wuhan Polytech Univ(in Chinese), 2018, 37(3):60–63.
[92]韩福芹,邵博,王清文,等.羧甲基纤维素接枝甲基丙烯酸甲酯对稻壳水泥复合材料的增强作用[J].东北林业大学学报, 2009, 37(2):40–43.HAN Fuqin, SHAO Bo, WANG Qingwen, et al. J Northeast Forest Univ(in Chinese), 2009, 37(2):40–43.
[93] BILBA K, ARSENE M A. Silane treatment of bagasse fiber for reinforcement of cementitious composites[J]. Composites Part A:Appl Sci Manuf, 2008, 39(9):1488–1495.
[94] AKINYEMI A B, OMONIYI E T, ONUZULIKE G. Effect of microwave assisted alkali pretreatment and other pretreatment methods on some properties of bamboo fibre reinforced cement composites[J].Constr Build Mater, 2020, 245:118405.
[95] GHAFFAR S H, FAN M. Differential behaviour of nodes and internodes of wheat straw with various pre-treatments[J]. Biomass Bioenerg, 2015, 83:373–382.
基本信息:
DOI：10.14062/j.issn.0454-5648.20210299
中图分类号:TU528
引用信息:
[1]杨政险,李慷,张勇,等.天然植物纤维预处理方法对水泥基复合材料性能的影响研究进展[J].硅酸盐学报,2022,50(02):522-532.DOI:10.14062/j.issn.0454-5648.20210299.
基金信息:
福建省闽江学者特聘教授奖励计划(GXRC-19045); 福建省自然科学基金面上项目(2019J01235); 陕西省自然科学基金面上项目(2020JM-469); 国家自然科学基金面上项目(52078414)
2021-04-21
2021
2022-01-19
2021-10-26
2021
1
2022-01-19
2022-01-19
2022-01-19