| 829 | 19 | 76 |
| 下载次数 | 被引频次 | 阅读次数 |
ZrB2基超高温陶瓷具有高熔点、较高的强度、高热导率等优点,是一种性能优异的高温结构材料,成为高超声速飞行器关键热部件的首选候选材料。介绍了ZrB2的基本性能,以及ZrB2基超高温陶瓷材料的抗热震性能及改进情况,讨论了表面热交换系数梯度对材料热震行为的影响,对超高温陶瓷材料的热震行为和热震失效机制有了新的认识,为材料在实际服役条件下的性能预测提供参考,并为材料抗热震性能的提高提供了新的研究思路。
Abstract：ZrB2-based ultra-high temperature ceramics(UHTCs) are promising candidates for high-temperature applications of thermal protection systems(TPS) of hypersonic re-entry space vehicles due to their superior comprehensive properties of high melting points, good strengths and high thermal conductivities. The information of ZrB2 were represented. The thermal shock resistance and performance improvements of Zr B2-based UHTCs were summarized. The effect of surface heat transfer coefficient gradient on the thermal shock failure was discussed. This review provides some complementary information for understanding the thermal shock behavior, gives some comments on predicting materials performance in applications, and offers research ideas of improving materials performance as well.
[1]陈玉峰,洪长青,胡成龙,等.空天飞行器用热防护陶瓷材料[J].现代技术陶瓷, 2017, 38(5):311–390.CHEN Yufeng, HONG Changqing, HU Chenglong, et al. Adv Ceram,2017, 38(5):311–390.
[2]UPADHYAK,YANGJM,HOFFMANWP.Materialsforultrahigh temperaturestructuralapplications[J].AmCeramSocBull,1997,76(12):51–56.
[3]OPEKAMM,TALMYIG,ZAYKOSKIJA.Oxidation–based materialsselectionfor2000degreesCplushypersonicaerosurfaces:Theoreticalconsiderationsandhistoricalexperience[J].JMaterSci,2004, 39(19):5887–5904.
[4]VANWIEDM,DREWRYDG,KINGDE,etal.Thehypersonic environment:Requiredoperatingconditionsanddesignchallenges[J].J Mater Sci, 2004, 39(19):5915–5924.
[5]SONG G M, ZHOU Y, WANG Y J. Effect of carbide particles on the ablationpropertiesoftungstencomposites[J].MaterCharact,2003,50(4/5):293–303.
[6]CHRISTIN F. Design, fabrication, and application of thermostructural composites(TSC)likeC/C,C/SiC,andSiC/SiCcomposites[J].Adv Eng Mater, 2002, 4(12):903–912.
[7]SHEEHANJE,BUESKINGKW,SULLIVANBJ.Carbon-carbon composites[J]. Annu Rev Mater Sci, 1994, 24:19–44.
[8]CHAMBERLAINA,FAHRENHOLTZW,HILMASG,etal.OxidationofZrB2-SiCceramicsunderatmosphericandreentry conditions[J]. 2005.
[9]ZIMMERMANNJW,HILMASGE,FAHRENHOLTZWG,etal.ThermophysicalpropertiesofZrB2andZrB2–SiCceramics[J].JAm Ceram Soc, 2008, 91(5):1405–1411.
[10]王明福,汪长安,张幸红.ZrB2–SiCpl复合陶瓷的SPS烧结行为及微观结构[J].硅酸盐学报, 2011, 39(8):1286–1289.WANG Mingfu, WANG Chang’an, ZHANG Xinghong. J Chin Ceram Soc, 2011, 39(8):1286–1289.
[11]FAHRENHOLTZW G, HILMAS G E, TALMY I G, et al. Refractory diborides of zirconium and hafnium[J]. J Am Ceram Soc, 2007, 90(5):1347–1364.
[12]宋希文,赛音巴特尔.特种耐火材料[M].北京:化学工业出版社,2010.
[13]KUWABARA.K.CorrosionResistanceandElectricalResistivityof ZrB2MonolithicRefractories[J].JTechAssocRefrac,Japan,2004,24(3):206–207.
[14]刘朋闯.二硼化锆靶材及薄膜制备技术研究[D].绵阳:中国工程物理研究院, 2012.LIUPengchuang.Researchonpreparationofzirconiumdiboride targetsandthinfilms(inChinese,dissertation).Mianyang:China Academy of Engineering Physics, 2012.
[15]JIN Z J, ZHANG M, GUO D M, et al. Electroforming of copper/ZrB2composite coating and its performance as electro-discharge machining electrodes[J]. Adv Abras Technol Viii, 2005, 291–292:537–542.
[16]SUNGJW,GOEDDEDM,GIROLAMIGS,etal.Remote-plasma chemical vapor deposition of conformal ZrB2 films at low temperature:Apromisingdiffusionbarrierforultralargescaleintegrated electronics[J]. J Appl Phys, 2002, 91(6):3904–3911.
[17]MURATA Y. Cutting tool tips and ceramics containing hafnium nitride and zirconium diboride[J]. U.S. Patent, 1970, 3:487–594.
[18]HANJ,HUP,ZHANGX,etal.Oxidation-resistantZrB2–SiC composites at 2200 degrees C[J]. Compos Sci Technol, 2008, 68(3/4):799–806.
[19]ZHANGX,XUL,HANW,etal.Microstructureandpropertiesof siliconcarbidewhiskerreinforcedzirconiumdiborideultra-high temperature ceramics[J]. Solid State Sci, 2009, 11(1):156–161.
[20]WANGZ,HONGC,ZHANGX,etal.Microstructureandthermal shock behavior of ZrB2–SiC–graphite composite[J]. Mater Chem Phys,2009, 113(1):338–341.
[21]LINJ,ZHANGX,HANJ,etal.Oxidationbehaviorandphase transitionofZrB2–SiCw–ZrO2fceramic[J].CorrosSci,2014,78:13–21.
[22]LIW,ZHANGY,ZHANGX,etal.Thermalshockbehaviorof ZrB2–SiC ultra-high temperature ceramics with addition of zirconia[J].J Alloy Compd, 2009, 478(1/2):386–391.
[23]WEIC,ZHANGX,HANW,etal.EffectofMoldingProcesson PropertiesofLaminatedZrB2–SiC–CgUltraHighTemperature Ceramics[J]. High-Perform Ceram Viii, 2014, 602–603:443–446.
[24]ZIMMERMANN J W, HILMAS G E, FAHRENHOLTZ W G. Thermal shock resistance and fracture behavior of ZrB2-based fibrous monolith ceramics[J]. J Am Ceram Soc, 2009, 92(1):161–166.
[25]WANGCM,EMOTOH,MITOMOM.Nucleationandgrowthof siliconoxynitridegrainsinafine-grainedsiliconnitridematrix[J].J Am Ceram Soc, 1998, 81(5):1125–1132.
[26]王昕,谭训彦,尹衍升,等.纳米复合陶瓷增韧机理分析[J].陶瓷学报, 2000, 21(2):107–111.WANGXin,TANXunyan,YINYansheng,etal.Journalofceramics,2000, 21(2):107–111.
[27]NIHARAK.Newdesignconceptofstructuralceramics:ceramicnano composites:Composities[J]. J Ceram Soc Jpn, 2010, 99(1154):974–982.
[28]PICIACCHIOA,LEESH,MESSINGGL.Processingand microstructuredevelopmentinalumina–siliconcarbideintragranular particulate composites[J]. J Am Ceram Soc, 1994, 77(8):2157–2164.
[29]ZIMMERMANN J W, HILMAS G E, FAHRENHOLTZ W G. Thermal shockresistanceofZrB2andZrB2–30%SiC[J].MaterChemPhys,2008, 112(1):140–145.
[30]MONTEVERDE F, SCATTEIA L. Resistance to thermal shock and to oxidation of metal diborides-SiC ceramics for aerospace application[J].J Am Ceram Soc, 2007, 90(4):1130–1138.
[31]GUI K, HU P, HONG W, et al. Microstructure, mechanical properties and thermal shock resistance of ZrB2–SiC–Cf composite with inhibited degradation of carbon fibers[J]. J Alloy Compd, 2017, 706:16–23.
[32]ZHANGX,XUL,DUS,etal.Thermalshockbehaviorof SiC–whisker–reinforceddiborideultrahigh-temperatureceramics[J].Scripta Mater, 2008, 59(1):55–58.
[33]刘国仟.Zr B2–SiC基超高温陶瓷材料热冲击失效行为的研究[D].哈尔滨:哈尔滨工业大学, 2009.LIUGuoqian.ThermalshockfailureofZrB2–SiCbasedultrahigh temperature ceremic(in Chinese, dissertation). Harbin:Harbin Institute of Technology, 2009.
[34]王超.Zr B2–SiC基超高温陶瓷复合材料失效机制的表征与评价[D].哈尔滨:哈尔滨工业大学, 2009.WANG Chao. Characterization and evaluation of failure mechanism of ZrB2–SiCultrahightemperatureceramiccomposites(inChinese,dissertation). Harbin:Harbin Institute of Technology, 2009.
[35]WANGCA,WANGMF.ThermalshockbehaviorofZrB2–SiC ceramicswithdifferentquenchingmedia[J].FrontMaterSci,2013,7(2):184–189.
[36]美国材料与试验协会.ASTMC1525-04水淬法测定先进陶瓷的抗热冲击性的标准试验方法[S].西康舍霍肯:美国材料与试验协会, 2009.
[37]COLLINM,ROWCLIFFED.Analysisandpredictionofthermal shock in brittle materials[J]. Acta Mater, 2000, 48(8):1655–1665.
[38]JIN H, MENG S, XU C, et al. A novel method to evaluate the thermal shockbehaviorofZrB2–SiC–graphitecompositesunderalternating complexthermalstressenvironments[J].CeramInt,2016,42(14):16354–16358.
[39]HASSELMANDPH.Strengthbehaviorofpolycrystallinealumina subjected to thermal shock[J]. J Am Ceram Soc, 2010, 53:490–495.
[40]WANGA,HUP,ZHANGX,etal.Thermalshockbehaviorof ZrB2-basedsharpleadingedgesevaluatedbyanovelwaterspraying method[J]. Ceram Int, 2018, 44(2):2376–2382.
[41]张幸红,胡平,韩杰才,等.超高温陶瓷复合材料的研究进展[J].科学通报, 2015, 60(3):257–266.ZHANGXinhong,HUPing,HANJiecai,etal.ChinSciBull(in Chinese), 2015, 60(3):257–266.
[42]HASSELMAND P H. Griffith criterion and thermal shock resistance of single-phase versus multiphase brittle ceramics[J]. J Am Ceram Soc,1969, 52(5):288–289.
[43]WANG Y, LIANG J, HAN W, et al. Mechanical properties and thermal shockbehaviorofhot-pressedZrB2–SiC–AlNcomposites[J].JAlloy Compd, 2009, 475(1/2):762–765.
[44]HASSELMAN D P H. Micromechanical thermal stresses and thermal stress resistance of porous brittle ceramics[J]. J Am Ceram Soc, 1969,52(4):215–216.
[45]ZHANGX,QUQ,HANJ,etal.Microstructuralfeaturesand mechanical properties of ZrB2–SiC–ZrC composites fabricated by hot pressingandreactivehotpressing[J].ScriptaMater,2008,59(7):753–756.
[46]WANGZ,HONGC,ZHANGX,etal.Microstructureandthermal shock behavior of ZrB2–SiC-graphite composite[J]. Mater Chem Phys,2009, 113(1):338–341.
[47]WANGZ,WANGS,ZHANGX,etal.Effectofgraphiteflakeon microstructureaswellasmechanicalpropertiesandthermalshock resistanceofZrB2–SiCmatrixultrahightemperatureceramics[J].J Alloy Compd, 2009, 484(1/2):390–394.
[48]HUP,GUIK,HONGW,etal.High-performanceZrB2–SiC–Cfcompositepreparedbylow-temperaturehotpressingusingnanosized ZrB2 powder[J]. J Eur Ceram Soc, 2017, 37(6):2317–2324.
[49]GUI K, HU P, HONG W, et al. Microstructure, mechanical properties and thermal shock resistance of ZrB2–SiC–Cf composite with inhibited degradation of carbon fibers[J]. J Alloy Compd, 2017, 706:16–23.
[50]HONGW,GUIK,HUP,etal.Preparationandcharacterizationof high–performanceZrB2–SiC–Cfcompositessinteredat1450degrees C[J]. J Adv Ceram, 2017, 6(2):110–119.
[51]桂凯旋.Zr B2–SiC–Csf复合材料的低温致密化行为与机理研究[D].哈尔滨:哈尔滨工业大学复合材料与结构研究所, 2017.GUIKaixuan.Low–Temperaturedensificationandmechanismof ZrB2–SiC–Csf composites(inChinese,dissertation).Harbin:Harbin Institute of Technology, 2017.
[52]SILVESTRONIL,SCITID,HILMASGE,etal.Effectofaweak fiberinterfacecoatinginZrB2reinforcedwithlongSi Cfibers[J].Materials&Design, 2015, 88:610-618.
[53]SCITID,GUICCIARDIS,SILVESTRONIL.SiCchoppedfibers reinforcedZrB2:Effectofthesinteringaid[J].ScriptaMater,2011,64(8):769–772.
[54]SHAJJ,LIJ,LVZZ,etal.ZrB2-basedcompositestoughenedby as–received and heat–treated short carbon fibers[J]. J Eur Ceram Soc,2017, 37(2):549–558.
[55]SHAJJ,LIJ,WANGSH,etal.Tougheningeffectofshortcarbon fibers in the ZrB2–ZrSi2 ceramic composites[J]. Mater Des, 2015, 75:160–165.
[56]YANGF,ZHANGX,HANJ,etal.Mechanicalpropertiesofshort carbon fiber reinforced ZrB2–SiC ceramic matrix composites[J]. Mater Lett, 2008, 62(17/18):2925–2927.
[57]YANGF,ZHANGX,HANJ,etal.Characterizationofhot-pressed short carbon fiber reinforced ZrB2–SiC ultra–high temperature ceramic composites[J]. J Alloy Compd, 2009, 472(1–2):395–399.
[58]杨飞宇,杜善义,孟松鹤.碳短纤维–ZrB2陶瓷基复合材料的制备与性能研究[J].稀有金属材料与工程, 2007, 36(S1):700–703.YANG Feiyu, DU Shanyi, MENG Songhe. Rare Metal Mater Eng(in Chinese), 2007, 36(S1):700–703.
[59]SILVESTRONIL,FABBRICHEDD,MELANDRIC,etal.Relationshipsbetweencarbonfibertypeandinterfacialdomainin ZrB2-based ceramics[J]. J Eur Ceram Soc, 2016, 36(1):17–24.
[60]HU P, GUI K, HONG W, etal. Preparation of ZrB2–SiC ceramics by single-step and optimized two-step hot pressing using nanosized ZrB2powders[J]. Mater Lett, 2017, 200:14–17.
[61]金格瑞,鲍恩,乌尔曼.陶瓷导论[M].北京:中国建筑工业出版社,1982:822.
[62]ZHOUZH,DINGPD,TANSH,etal.Anew thermal-shock-resistancemodelforceramics:Establishmentand validation[J]. Mater Sci Eng A–Struct, 2005, 405(1–2):272–276.
[63]SINGH J P, THOMAS J R, HASSELMAN D P H. Analysis of effect of heat-transfervariablesonthermalstressresistanceofbrittleceramics measuredbyquenchingexperiments[J].JAmCeramSoc,1980,63(3/4):140–144.
[64]SINGHJP,TREEY,HASSELMANDPH.Effectofbathand specimentemperatureonthethermalstressresistanceofbrittle ceramics subjected to thermal quenching[J]. J Mater Sci, 1981, 16(8):2109–2118.
[65]CHENL,ZHUF,ZHANGZ,etal.Anaqueouspolymerquenching medium for instantaneous thermal shock cooling rate study of ceramic materials[J]. J Alloy Compd, 2017, 724:234–239.
[66]CHENL,WANGA,SUOX,etal.Effectofsurfaceheattransfer coefficientgradientonthermalshockfailureofceramicmaterials underrapidcoolingcondition[J].CeramInt,2018:doi:10.1016/j.ceramint.2018.1002.1100.
基本信息:
DOI：10.14062/j.issn.0454-5648.2018.09.09
中图分类号:TQ174.1
引用信息:
[1]陈丽敏,索相波,王安哲,等.ZrB_2基超高温陶瓷材料抗热震性能及热震失效机制研究进展[J].硅酸盐学报,2018,46(09):1235-1243.DOI:10.14062/j.issn.0454-5648.2018.09.09.
基金信息:
挑战计划(tz2016004)资助
2018-07-02
2018-07-02
2018-07-02