| 228 | 0 | 251 |
| 下载次数 | 被引频次 | 阅读次数 |
连续碳化硅纤维增强碳化硅陶瓷基复合材料(简称SiCf/SiC复合材料)由于其优异高温性能已成为高推重比航空发动机首选高温轻质热结构材料，但其高温抗氧化腐蚀性能较差限制了长寿命使用。本文综述了SiCf/SiC复合材料中引入自愈合组元、网络中间体氧化物以及稀土硅酸盐组元等进行基体改性的研究进展，系统分析了不同改性组元提升其抗氧化腐蚀性能的改性机理与改性工艺，对存在问题及未来发展方向进行了展望。
Abstract：Continuous silicon carbide fiber reinforced silicon carbide ceramic matrix composites(referred to as SiCf/SiC composites) become the preferred high-temperature and lightweight thermal structure materials for high thrust-to-weight ratio aero engines due to their excellent high-temperature properties. However, their poor high-temperature oxidation and corrosion properties limit their long-life use. It is effective to improve the oxidation and corrosion properties of SiCf/SiC composite matrix through matrix modification, and the commonly used modified materials mainly include self-healing components, network intermediate oxides and rare-earth silicates. The self-healing components form the liquid phase of B_2O3 or borosilicate glass phase in the process of oxidative corrosion that has a certain fluidity and viscosity at a high temperature, which can fill the cracks and holes in the matrix. The volume expansion caused by oxidation makes the small defects heal when the oxidizing medium diffuses in the cracks as the oxidation phase, which can effectively block the diffusion of the oxidizing medium to the key areas that are easy to oxidize such as fibers and interfaces, thus enhancing the oxidation resistance of the material and extending its service life. The network intermediate oxide can absorb the "free oxygen" in the borosilicate glass melt and change its coordination from [MO6] to [MO4], reconstructing the silicate network damaged by water vapor erosion and maintain its integrity, and significantly improving the stability of the self-healing glass phase under high temperature water vapor conditions and the oxidation and corrosion properties of composites. Rare-earth silicate itself has excellent antioxidant corrosion properties, and the rare-earth elements migrate to the near surface of the matrix to form an antioxidant layer during the oxidative corrosion process, which inhibits the penetration of oxidative corrosion medium into the matrix and the reaction between borosilicate glass and water vapor, reduces the generation of gaseous substances, and slows down the oxidative corrosion of the matrix to a certain extent. There are two main ways to introduce modified materials into the matrix, i.e., one refers to the direct introduction of antioxidant corrosive materials without changing their phases during use, such as directly introducing rare-earth silicates into the matrix, and another refers to the introduction of the precursor of the modified material or substances containing modified elements into the matrix, and the target modified material is obtained through chemical reactions during the oxidative corrosion process, usually in this way the introduction of self-healing components and oxidation corrosion phases into the matrix. In addition, the synthesis process of modified materials mostly adopts CVI, PIP, RMI, SI, etc., and their advantages and disadvantages of different modification processes are different. For instance, the preparation temperature of CVI process is low, but the densification cycle is long and the cost is high. The RMI process is simple, the cycle is short, and the composite material with a high density is prepared, but the melting temperature is high, which is easy to heat damage to the fiber and interface. Besides a single process, composite processes are mostly used to achieve complementary advantages, introducing modified materials into the matrix and realizing the densification of composite materials. Summary and Prospects It is effective to introduce self-healing components, network intermediate oxides and rare-earth silicates into the SiCf/SiC composite matrix to fill the pores and cracks of the material via generating self-healing components during the oxidative corrosion process, and forming a dense oxide layer on the surface of the material to resist further erosion by the oxidizing medium, thus improving the water and oxygen corrosion resistance of the composites. However, there are still some challenges. Firstly, the research on the oxidation corrosion mechanism of composite materials is still in-depth, and there is a lack of data on oxidation kinetics, oxidative corrosion rate and oxidative corrosion depth, and the basic research on the damage evolution mechanism of materials in different environments is still relatively weak. It is thus necessary to construct a complete and reliable performance database of SiCf/SiC composites modified with different substrates, clarify the oxidative corrosion damage mechanism, and provide design parameters and theoretical support for the practical application of composites. Secondly, the effective temperature range of a single modified substance to improve the oxidative corrosion performance of composites is limited. The temperature range of B group is below 1000 ℃, and the temperature range of Al group is 1000–1300 ℃. The synergistic effect of multiple modification strategies is explored via introducing multiple modified substances into the matrix of composites at the same time. It is expected to achieve the oxidation and corrosion properties of SiCf/SiC composites in a wide temperature range and achieve a long-life cycle protection. Finally, it is also worth to develop new preparation processes, such as nano-infiltration and transient eutectic(NITE), or use hybrid processes to achieve material densification and improve the performance of SiCf/SiC composite substrates while modifying them.
[1]焦华宾,莫松.航空涡轮发动机现状及未来发展综述[J].航空制造技术, 2015, 58(12):62–65.JIAO Huabin, MO Song. Aeronaut Manuf Technol, 2015, 58(12):62–65.
[2]马薏文,苗辉.涡轮温度场仿真技术发展方向研究[J].航空动力,2021(1):48–51.MA Yiwen, MIAO Hui. Aerosp Power, 2021(1):48–51.
[3]付青峰,杨细莲,刘克明.航空发动机高温材料的研究现状及展望[J].热处理技术与装备, 2018, 39(3):69–73.FU Qingfeng, YANG Xilian, LIU Keming. Heat Treat Technol Equip,2018, 39(3):69–73.
[4]陶顺衍,杨加胜,邵芳,等.航机CMC热端部件用热喷涂涂层的机遇与挑战[J].无机材料学报, 2024, 39(10):1077–1083.TAO Shunyan, YANG Jiasheng, SHAO Fang, et al. J Inorg Mater, 2024,39(10):1077–1083.
[5]刘大响.一代新材料,一代新型发动机:航空发动机的发展趋势及其对材料的需求[J].材料工程, 2017, 45(10):1–5.LIU Daxiang. J Mater Eng, 2017, 45(10):1–5.
[6]YIN X W, CHENG L F, ZHANG L T, et al. Fibre-reinforced multifunctional SiC matrix composite materials[J]. Int Mater Rev, 2017,62(3):117–172.
[7]CHEN X W, CHENG G F, ZHANG J M, et al. Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior[J]. J Adv Ceram, 2020, 9(5):567–575.
[8]NASLAIN R. Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors:An overview[J]. Compos Sci Technol, 2004, 64(2):155–170.
[9]LUO H, LUO R Y, WANG L Y, et al. Effects of fabrication processes on the properties of SiC/SiC composites[J]. Ceram Int, 2021, 47(16):22669–22676.
[10]WANG P R, LIU F Q, WANG H, et al. A review of third generation SiC fibers and SiCf/SiC composites[J]. J Mater Sci Technol, 2019, 35(12):2743–2750.
[11]刘巧沐,黄顺洲,何爱杰.碳化硅陶瓷基复合材料在航空发动机上的应用需求及挑战[J].材料工程, 2019, 47(2):1–10.LIU Qiaomu, HUANG Shunzhou, HE Aijie. J Mater Eng, 2019, 47(2):1–10.
[12]TAGUCHI T, IGAWA N, YAMADA R, et al. Effect of thick SiC interphase layers on microstructure, mechanical and thermal properties of reaction-bonded SiC/SiC composites[J]. J Phys Chem Solids, 2005,66(2–4):576–580.
[13]DAYI E N, AL NASIRI N. Diffusion study of rare-earth oxides into silica layer for environmental barrier coating applications[J]. J Eur Ceram Soc,2019, 39(14):4216–4222.
[14]邹豪,王宇,刘刚,等.碳化硅纤维增韧碳化硅陶瓷基复合材料的发展现状及其在航空发动机上的应用[J].航空制造技术, 2017,60(15):76–84.ZOU Hao, WANG Yu, LIU Gang, et al. Aeronaut Manuf Technol, 2017,60(15):76–84.
[15]KARADIMAS G, SALONITIS K. Ceramic matrix composites for aero engine applications:A review[J]. Appl Sci, 2023, 13(5):3017.
[16]周新贵. PIP工艺制备陶瓷基复合材料的研究现状[J].航空制造技术,2014, 57(6):30–34.ZHOU Xingui. Aeronaut Manuf Technol, 2014, 57(6):30–34.
[17]GUO F Y, CHEN X W, CHENG G F, et al. Microstructural and mechanical evolution of SiCf/SiC composites in wet oxygen atmosphere above 1000℃[J]. Ceram Int, 2022, 48(6):8473–8480.
[18]YE Z L, LUO R Y, WANG L Y, et al. Evolution of high temperature oxidation properties of SiCf/SiCN composites with BN interphase[J].Ceram Int, 2024, 50(22):44972–44982.
[19]ZOK F W, MAXWELL P T, KAWANISHI K, et al. Degradation of a SiC-SiC composite in water vapor environments[J]. J Am Ceram Soc,2020, 103(3):1927–1941.
[20]JACOBSON N, FARMER S, MOORE A, et al. High-temperature oxidation of boron nitride:I, monolithic boron nitride[J]. J Am Ceram Soc, 1999, 82(2):393–398.
[21]周邦阳,崔永静,王长亮,等.稀土硅酸盐环境障涂层研究进展[J].材料工程, 2023, 51(12):12–23.ZHOU Bangyang, CUI Yongjing, WANG Changliang, et al. J Mater Eng,2023, 51(12):12–23.
[22]HAY R S, CHATER R J. Oxidation kinetics strength of Hi-NicalonTMS SiC fiber after oxidation in dry and wet air[J]. J Am Ceram Soc, 2017,100(9):4110–4130.
[23]GOU Y Z, JIAN K, WANG H, et al. Fabrication of nearly stoichiometric polycrystalline SiC fibers with excellent high-temperature stability up to1900℃[J]. J Am Ceram Soc, 2018, 101(5):2050–2059.
[24]杨会永,徐彬,陈典,等. Si C/SiC复合材料抗氧化界面相的研究现状及展望[J].硅酸盐学报, 2021, 49(7):1446–1456.YANG Huiyong, XU Bin, CHEN Dian, et al. J Chin Ceram Soc, 2021,49(7):1446–1456.
[25]SONG N, ZHANG H B, LIU H, et al. Effects of SiC whiskers on the mechanical properties and microstructure of SiC ceramics by reactive sintering[J]. Ceram Int, 2017, 43(9):6786–6790.
[26]王衍飞,刘荣军,张金,等. SiCf/SiC陶瓷基复合材料制备技术研究进展[J]. 2025(4):52–74.WANG Yanfei, LIU Rongjun, ZHANG Jin, et al.材料工程, 2025(4):52–74.
[27]AOUADI S M, GU J J, BERMAN D. Self-healing ceramic coatings that operate in extreme environments:A review[J]. J Vac Sci Technol A,2020, 38(5):050802.
[28]CHARPENTIER L, BALAT-PICHELIN M, AUDUBERT F. High temperature oxidation of SiC under helium with low-pressure oxygen:Part 1:Sintered α-SiC[J]. J Eur Ceram Soc, 2010, 30(12):2653–2660.
[29]WU H Y, GUO F Y, YIN H D, et al. Effects of wet oxidation on residual stress variation of SiCf/SiC composites[J]. Ceram Int, 2022, 48(8):11702–11708.
[30]JIN E Z, MA D H, YUAN Z S, et al. Influence of oxidation damages on mechanical properties of SiC/SiC composite using domestic Hi-Nicalon type SiC fibers[J]. Scanning, 2020, 2020(1):8840963.
[31]OPILA E J. Oxidation kinetics of chemically vapor-deposited silicon carbide in wet oxygen[J]. J Am Ceram Soc, 1994, 77(3):730–736.
[32]OPILA E J. Variation of the oxidation rate of silicon carbide with watervapor pressure[J]. J Am Ceram Soc, 1999, 82(3):625–636.
[33]KLEYKAMP H, SCHAUER V, SKOKAN A. Oxidation behaviour of SiC fibre reinforced SiC[J]. J Nucl Mater, 1995, 227(1–2):130–137.
[34]CHENG X, ZHANG Q, YE F, et al. Recent progress on wet-oxygen corrosion resistance of SiCf/SiC composites[J]. J Mater Res Technol,2024, 33:4360–4388.
[35]XU W B, ZOK F W, MCMEEKING R M. Model of oxidation-induced fiber fracture in SiC/SiC composites[J]. J Am Ceram Soc, 2014, 97(11):3676–3683.
[36]MARUOKA D, HARADA K, MURAKAMI T, et al. Influence of Na2SO4 molten salts on the self-healing behavior of Ni/Al2O3composites[J]. J Asian Ceram Soc, 2023, 11(4):472–479.
[37]ZHANG J F, ZHAO L, YANG J L, et al. Synergistic damage behavior of He ion irradiation and molten salt corrosion in SiC at 750℃[J]. J Adv Ceram, 2024, 13(11):1786–1794.
[38]陈家鑫,曾启航,王峰,等. B4C增强SiC基复合陶瓷力学性能和抗氧化性能[J].硅酸盐学报, 2023, 51(3):730–737.CHEN Jiaxin, ZENG Qihang, WANG Feng, et al. J Chin Ceram Soc,2023, 51(3):730–737.
[39]YANG Z H, JIA D C, ZHOU Y, et al. Oxidation resistance of hot-pressed SiC–BN composites[J]. Ceram Int, 2008, 34(2):317–321.
[40]ZUO X Z, ZHANG L T, LIU Y S, et al. Oxidation behaviour of twodimensional C/SiC modified with self-healing Si–B–C coating in static air[J]. Corros Sci, 2012, 65:87–93.
[41]LUAN X G, XU X M, ZOU Y, et al. Wet oxidation behavior of SiC/(SiCSiBCN)x composites prepared by CVI combined with PIOP process[J].J Am Ceram Soc, 2019, 102(10):6239–6255.
[42]CASTANIÉS, MÉAR F O, PODOR R, et al. 2D-and 3D observation and mechanism of self-healing in glass–boron composites[J]. J Am Ceram Soc, 2016, 99(3):849–855.
[43]FERRARIS M, MONTORSI M, SALVO M. Glass coating for SiCf/SiC composites for high-temperature application[J]. Acta Mater, 2000,48(18–19):4721–4724.
[44]张立同,成来飞.自愈合陶瓷基复合材料制备与应用基础[M].北京:化学工业出版社, 2015:57–63.
[45]REBILLAT F, MAETIN X, GARITTE E, et a1. Overview on the SelfSealing Process in the Si C F/[Si,C,B]M Composites under Wet Atmosphere at High Temperature[M]. Hoboken:Wiley, 2010:151–166.
[46]REBILLAT F. Advances in self-healing ceramic matrix composites[M]//Advances in Ceramic Matrix Composites. Amsterdam:Elsevier, 2014:565–605.
[47]RUGGLES-WRENN M B, DELAPASSE J, CHAMBERLAIN A L, et al. Fatigue behavior of a Hi-Nicalon™/SiC–B4C composite at 1200℃in air and in steam[J]. Mater Sci Eng A, 2012, 534:119–128.
[48]ZHANG Q, ZUO X Z, LIU Y S, et al. Oxidation behaviors and mechanisms of CVD Si-B-C ceramic in wet oxygen from 700℃to1400℃[J]. J Eur Ceram Soc, 2016, 36(15):3709–3715.
[49]LUAN X G, ZOU Y, HAI X H, et al. Degradation mechanisms of a selfhealing SiC(f)/BN(i)/[SiC-B4C](m)composite at high temperature under different oxidizing atmospheres[J]. J Eur Ceram Soc, 2018, 38(11):3804–3813.
[50]VIRICELLE J P, GOURSAT P, BAHLOUL-HOURLIER D. Oxidation behaviour of a boron carbide based material in dry and wet oxygen[J]. J Therm Anal Calorim, 2000, 63(2):507–515.
[51]NARAPARAJU R, MANIYA K, MURCHIE A, et al. Effect of moisture on the oxidation behavior of ZrB2[J]. J Am Ceram Soc, 2021, 104(2):1058–1066.
[52]QUEMARD L, REBILLAT F, GUETTE A, et al. Degradation mechanisms of a SiC fiber reinforced self-sealing matrix composite in simulated combustor environments[J]. J Eur Ceram Soc, 2007, 27(1):377–388.
[53]BOURHIS E L. Glass:mechanics and technology[M]. Weinheim:WileyVCH Verlag GmbH&Co. KGaA. 2006:56–59.
[54]周艳艳,张希艳.玻璃化学[M].北京:化学工业出版社, 2014:26–27.
[55]赵彦钊,殷海荣.玻璃工艺学[M].北京:化学工业出版社, 2006:10–24.
[56]单庆亮,胡建宝,李浩林,等.航空发动机用自愈合碳化硅陶瓷基复合材料研究进展[J].航空制造技术, 2023, 66(19):48–58.SHAN Qingliang, HU Jianbao, LI Haolin, et al. Aeronaut Manuf Technol, 2023, 66(19):48–58.
[57]LIAN M, WANG T, WEI C, et al. Effect of B2O3 and basic oxides on network structure and chemical stability of borosilicate glass[J].Ceramics, 2024, 7(2):516–529.
[58]张成弢,冀春霖. MgO-B2O3二元系熔渣中组元的活度[J].金属学报,1989, 25(4):100–103.ZHANG Chengtao, JI Chunlin. Acta Metall Sin, 1989, 25(4):100–103.
[59]赵定国,郭培民,赵沛. CaO-SiO2-B2O3熔渣的热力学计算模型[J].钢铁研究学报, 2010, 22(9):18–21.ZHAO Dingguo, GUO Peimin, ZHAO Pei. J Iron Steel Res, 2010, 22(9):18–21.
[60]STOLYAROVA V L, LOPATIN S I, SHUGUROV S M, et al.Thermodynamic properties of the system Mg O-B2O3 melts[J]. Russ J Gen Chem, 2010, 80(4):689–694.
[61]张成弢,冀春霖. SiO2-B2O3二元系熔渣中组元的活度[J].东北工学院学报, 1990, 11(1):8–12.ZHANG Chengtao, JI Chunlin. J Northeast Univ Nat Sci, 1990, 11(1):8–12.
[62]WANG Q F, PENG Y Q, JIANG W Q, et al. Effect of high temperature oxidation on mechanical and electromagnetic interference shielding effectiveness of Ti3SiC2 modified SiCf/BN/SiBCN composites[J]. Ceram Int, 2024, 50(11):20167–20175.
[63]MIAO Y, YANG Z H, LIANG B, et al. Oxidation behavior of SiBCN-Zr composites at 1500 ℃prepared by reactive spark plasma sintering[J].Corros Sci, 2018, 132:293–299.
[64]SUN T, XIAO H N, GUO W M, et al. Effect of Al2O3 content on BaO–Al2O3–B2O3–SiO2 glass sealant for solid oxide fuel cell[J]. Ceram Int,2010, 36(2):821–826.
[65]BRUNS S, UESBECK T, WEIL D, et al. Influence of Al2O3 addition on structure and mechanical properties of borosilicate glasses[J]. Front Mater, 2020, 7:189.
[66]SHAN Q L, WANG Q L, XUE Y D, et al. The surface cracking resistance of Al2O3-modified SiCf/SiC-B4C composites after cyclic oxidation in wet environment[J]. Adv Eng Mater, 2019, 21(9):1900458.
[67]SHAN Q L, LI R, YOU X, et al. Effects of molten NaCl on oxidation behavior of Al2O3-modified Si Cf/SiC-B4C composites under wet environment at 1300℃[J]. Ceram Int, 2025, 51(9):11404–11420.
[68]付鹏,徐志军,初瑞清,等.稀土氧化物在陶瓷材料中应用的研究现状及发展前景[J].陶瓷, 2008(12):7–10.FU Peng, XU Zhijun, CHU Ruiqing, et al. Ceramics, 2008(12):7–10.
[69]张俊敏,陈小武,杨金山,等. Y2O3改性SiC陶瓷高温水氧行为研究[J].中国材料进展, 2023, 42(6):456–463.ZHANG Junmin, CHEN Xiaowu, YANG Jinshan, et al. Mater China,2023, 42(6):456–463.
[70]ZHANG Q Z, XIA X D, CHEN P J, et al. Current research art of rare earth compound modified Si C-CMCs for enhanced wet-oxygen corrosion resistance[J]. Ceram Int, 2022, 48(17):24131–24143.
[71]BAKAN E, KINDELMANN M, KUNZ W, et al. High-velocity water vapor corrosion of Yb-silicate:Sprayed vs. sintered body[J]. Scr Mater,2020, 178:468–471.
[72]CHEN H F, ZHANG C, LIU Y C, et al. Recent progress in thermal/environmental barrier coatings and their corrosion resistance[J].Rare Met, 2020, 39(5):498–512.
[73]AL NASIRI N, PATRA N, JAYASEELAN D D, et al. Water vapour corrosion of rare earth monosilicates for environmental barrier coating application[J]. Ceram Int, 2017, 43(10):7393–7400.
[74]KLEMM H. Silicon nitride for high-temperature applications[J]. J Am Ceram Soc, 2010, 93(6):1501–1522.
[75]DUAN J J, CHEN M L, WANG J J, et al. Microstructure and wet-oxygen corrosion behaviors of in-suit grown Y3Si2C2 modified SiCf/SiC composites[J]. J Eur Ceram Soc, 2025, 45(2):116882.
[76]HE F, CAO Y J, LIU Y S, et al. Oxidation behaviors of yttrium silicate modified SiCf/SiC composites in air and water-oxygen environments[J].J Am Ceram Soc, 2025, 108(1):e20141.
[77]HE F, LIU Y S, LI J X, et al. The impact of water and oxygen contents on the corrosion performance of yttrium silicate modified SiCf/SiC composites under high temperature conditions[J]. J Eur Ceram Soc,2024, 44(4):2065–2077.
[78]成来飞,张立同,梅辉,等.化学气相渗透工艺制备陶瓷基复合材料[J].上海大学学报(自然科学版), 2014, 20(1):15–32.CHENG Laifei, ZHANG Litong, MEI Hui, et al. J Shanghai Univ Nat Sci Ed, 2014, 20(1):15–32.
[79]QUEMARD L, REBILLAT F, GUETTE A, et al. Self-healing mechanisms of a SiC fiber reinforced multi-layered ceramic matrix composite in high pressure steam environments[J]. J Eur Ceram Soc,2007, 27(4):2085–2094.
[80]VIRICELLE J P, GOURSAT P, BAHLOUL-HOURLIER D. Oxidation behaviour of a multi-layered ceramic-matrix composite(SiC)f/C/(Si BC)m[J].Compos Sci Technol, 2001, 61(4):607–614.
[81]徐永东,张立同,成来飞,等. CVI法制备连续纤维增韧陶瓷基复合材料[J].硅酸盐学报, 1995, 23(3):319–326.XU Yongdong, ZHANG Litong, CHENG Laifei, et al. J Chin Ceram Soc,1995, 23(3):319–326.
[82]MÜHLRATZER A. Production, properties and applications of ceramic matrix composites[J]. Cfi Ceram Forum Int, 1999, 76:30–35.
[83]LI Z M, GAO Z H, ZHANG X, et al. Oxidation behavior and subsequent mechanical properties of SiC/BN/SiBCN composite after exposure to steam at high temperature[J]. Corros Sci, 2025, 243:112584.
[84]XU X M, LUAN X G, ZHANG J H, et al. Single-source-precursor derived SiHfBCN enhancing oxidation resistance of SiC/SiC composites in wet oxygen[J]. Corros Sci, 2022, 208:110602.
[85]YANG H T, XU S W, ZHANG D X, et al. In-situ tensile damage and fracture behavior of PIP SiC/SiC minicomposites at room temperature[J].J Eur Ceram Soc, 2021, 41(14):6869–6882.
[86]LIU R J, WANG F, ZHANG J P, et al. Effects of CVI SiC amount and deposition rates on properties of SiCf/SiC composites fabricated by hybrid chemical vapor infiltration(CVI)and precursor infiltration and pyrolysis(PIP)routes[J]. Ceram Int, 2021, 47(19):26971–26977.
[87]COLOMBO P, MERA G, RIEDEL R, et al. Polymer-derived ceramics:40 years of research and innovation in advanced ceramics[J]. J Am Ceram Soc, 2010, 93(7):1805–1837.
[88]SUN X N, YIN X W, FAN X M, et al. Oxidation resistance of SiC/SiC composites containing Si BC matrix fabricated by liquid silicon infiltration[J]. J Eur Ceram Soc, 2018, 38(2):479–485.
[89]TSUNOURA T, OKUBO Y, YOSHIDA K, et al. Oxidation behavior of monolithic HfSi2 and SiC fiber-reinforced composites fabricated by melt infiltration using Si–8.5 at%Hf alloy at 800–1200℃in dry air[J]. J Ceram Soc Japan, 2018, 126(1):27–33.
[90]AOKI T, OGASAWARA T. Tyranno ZMI fiber/TiSi2–Si matrix composites for high-temperature structural applications[J]. Compos Part A Appl Sci Manuf, 2015, 76:102–109.
[91]SUYAMA S, ITOH Y, KOHYAMA A, et al. Effect of residual silicon phase on reaction-sintered silicon carbide[C]//International Symposium on Si C/Si C Composite Materials Research and Development and Its Application to Advanced Energy Systems, Kyoto, Japan, 2002:181–188.
[92]ZHANG J M, CHEN X W, LIAO C J, et al. Optimizing microstructure and properties of SiCf/SiC composites prepared by reactive melt infiltration[J]. J Inorg Mater, 2021, 36(10):1103.
[93]WEN T H, WEN Q B, LU L, et al. Effects of polymer-derived Zi C interlayer on mechanical properties and ablation performance of C/CZiC-ZrC-SiC composites prepared by RMI[J]. J Eur Ceram Soc, 2024,44(10):5623–5638.
[94]刘虎,杨金华,陈子木,等.熔融渗硅工艺制备的SiCf/SiC复合材料微观结构与性能[J].宇航材料工艺, 2020, 50(6):48–54.LIU Hu, YANG Jinhua, CHEN Zimu, et al. Aerosp Mater Technol, 2020,50(6):48–54.
[95]LI J X, LIU Y S, HE F, et al. Preparation and properties of SiC/SiC-SiYC with excellent water-oxygen corrosion resistance[J]. J Eur Ceram Soc,2023, 43(14):6606–6611.
[96]高雨晴.反应熔渗法制备抗水腐蚀Si-Y-C陶瓷基复合材料的工艺研究[D].西安:西北工业大学, 2021.GAO Yuqing. Study on preparation of water-corrosion-resistant Si-Y-C ceramic matrix composite by reaction melt infiltration[D]. Xi'an:Northwestern Polytechnical University, 2021.
[97]ZHANG B H, LIU Y S, GAO Y Q, et al. Water and oxygen corrosion resistance of SiCf/SiC–SiYBC composites prepared by reactive melt infiltration at 1300℃–1500℃[J]. Int J Appl Ceram Technol, 2024, 21(2):1094–1103.
[98]XIAO K D, ZENG Y, XIONG X, et al. Significantly improved wateroxygen corrosion resistance of SiC/SiC composite modified by Si-B-MoY using reactive melt infiltration[J]. Corros Sci, 2024, 237:112332.
[99]WANG P, WANG Q L, ZHANG X Y, et al. Oxidation behavior of SiCf/SiC composites modified by layered-Y2Si2O7 in wet oxygen environment[J]. J Inorg Mater, 2019, 34(8):904.
[100]GUO R R, LI L, LI Z J, et al. Improved oxidation and ablation resistance of SiCf/SiC-HfB2 composites:Role of oxygen-blocking scale and protection mechanism[J]. Ceram Int, 2024, 50(22):46377–46390.
[101]MA Y J, MENG X Y, YANG S B, et al. Significant improvement of resistance to dry/water oxygen corrosion at medium and high temperatures of SiC/SiC composites upon matrix modification by CaY-Al-Si-O microcrystalline glass[J]. J Eur Ceram Soc, 2023, 43(11):4645–4655.
[102]穆爽,马沁,张禹,等. Yb2Si2O7改性SiC/SiC复合材料的氧化行为研究[J].无机材料学报, 2025, 40(3):323–328.MU Shuang, MA Qin, ZHANG Yu, et al. J Inorg Mater, 2025, 40(3):323–328.
基本信息:
DOI：10.14062/j.issn.0454-5648.20250721
中图分类号:TB332
引用信息:
[1]刘永胜,任洁,李昀臻,等.SiC_f/SiC复合材料基体改性抗氧化腐蚀研究进展[J].硅酸盐学报,2026,54(04):1257-1273.DOI:10.14062/j.issn.0454-5648.20250721.
基金信息:
陕西省重点研发计划（2025CY-GJHX-15）; 国家重点研发计划（2023YFB4606100）; 科创甬江2035国际科技合作项目（2024H018）; 科创甬江2035重点研发项目（2025Z071）
2026-01-30
2026-01-30
2026-01-30